22

SIDE BURNER CAPS AND GRATE

Cleaning Method:
■Clean with a brass bristle brush.
■Wash grate using mild detergent, warm water and degreaser.
■Rinse with clean water and dry with soft, lint-free cloth.
■KitchenAid® Stainless Steel Cleaner and Polish Part Number
4396920 (not included) or KitchenAid® Stainless Steel Wipes
Part Number 8212510 (not included):
See “Assistance or Service” section to order.

KNOBS AND FLANGE AREA AROUND KNOBS

IMPORTANT: To avoid damage to knobs or to flange area around
knobs, do not use steel wool, abrasive cleaners, or oven cleaner.
Do not soak knobs.
Cleaning Method:
■Mild detergent, a soft cloth and warm water.
■Rinse and dry.

CONTROL PANEL GRAPHICS

IMPORTANT: To avoid damage to control panel graphics, do not
use steel wool, abrasive cleaners or oven cleaner.
Do not spray cleaner directly onto panel.
Cleaning Method:
■Clean around the burner labels gently; scrubbing may remove
printing.
■Mild detergent, soft cloth and warm water.
■Rinse and dry.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

■Is the main or regulator gas shutoff valve in the off
position?
See the Installation Instructions.
■Is the gas supply properly connected?
Contact a trained repair specialist or see Installation
Instructions.
■Is the 5,000mAmp power supply cord unplugged?
Plug into a grounded 3 prong outlet.
■Has a household fuse blown, or has a circuit breaker
tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you
use only factory specified parts. These factory specified parts will
fit right and work right because they are made with the same
precision used to build every new KITCHENAID® appliance.
To locate factory specified parts in your area, call us or your
nearest KitchenAid designated service center.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING