INSTALLATION INSTRUCTIONS
Built-in Outdoor Side Burner Installation
WARNING
Excessive Weight Hazard
Use two or more people to move and install side burner.
Failure to do so can result in back or other injury.
■Unpack side burner. Remove all packaging materials and remove side burner from carton.
■Place side burner into outdoor enclosure, but leave enough room in back to connect to gas supply and electrical single prong
Install Tank Tray for 20 lb LP Gas Fuel Tank
For Models Equipped for Use with a 20 lb LP Tank
1.Position the tank tray for 20lb LP gas fuel tank in the island cabinet.
2¹⁄₄"
(5.7 cm)
centerline of tank tray
|
|
| 18³⁄₈" |
|
| A |
| |
|
|
|
|
|
|
|
| |
| 20⁵⁄₈" |
|
|
|
|
| ||
|
| B |
|
| ||||
| (52.4 cm) | (46.7 cm) |
|
|
| |||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Dimension A | Dimension B | ||||
|
|
|
|
|
|
|
|
|
Front to back burner | 8³⁄₃₂" (20.6 cm) | 16³⁄₁₆" (41.1 cm) | ||||||
|
|
|
|
|
|
|
|
|
Side by side burner | 12⁹⁄₁₆" (31.9 cm) | 25¹⁄₈" (63.8 cm) | ||||||
|
|
|
|
|
|
|
|
|
2.Square the tank tray mounting brackets and mark the mounting hole locations in the island base.
3.Remove the top nuts (4) from the tank tray assembly and lift the tank tray off of the mounting brackets.
A
B
C
D
E
A. Top nut
B. Tank tray
C. Bottom nut
D.Bolt
E.Mounting bracket
4.Install the tank tray mounting brackets to the base or floor of the island using the proper size and type of mounting hardware (not supplied). Tighten mounting hardware.
A 
B 
C
3"
(7.6 cm)
A. Screw (Use proper screw for island floor material.)
B. Lock washer
C. Flat washer
5.
6.Remount the tank tray back onto the mounting brackets. Replace the 4 top nuts but do not tighten.
A 
B
C 
D
A. 20 lb LP gas fuel tank
B. Tank tray for 20 lb gas fuel tank
C. Top nut (do not tighten)
D. Mounting bracket
13
