9.Use pipe wrench to install the convertible regulator. Brass cap will be facing up when tight.

AB

A. Brass elbow

B. Convertible regulator

10.To make sure the regulator is set for Natural gas, use adjustable wrench to remove brass cap on appliance regulator.

11.Examine the stem on the brass cap. If the letters “NAT” are not showing on the end of the plastic stem farthest away from the brass cap, remove stem from cap, turn it over and snap stem back into the cap so the letters “NAT” are at the end of the stem farthest away from the brass cap.

NAT

12.Reinstall cap onto convertible regulator.

Change the Side burner orifices

1.Remove the side burner grates.

2.Remove the burner caps. The caps are interlocked to the burner base. Twist and lift the burner caps to remove.

3.Use 10 mm socket and wrench or 10 mm nut driver to remove the brass orifices from inside the burner base.

4.Use 10 mm socket and wrench or 10 mm nut driver to install the new 2.1 mm orifices supplied with this kit.

NOTE: The number 2.1 is stamped on the orifice for identification.

5.Repeat the procedure for the other burner.

6.Replace the burner top and caps. Align the notches in the bottom of the burner top with the tabs on the burner base and twist until the burner top is seated on the burner base. You will feel it drop into the deep notch.

AB

A. Burner top notches

B. Burner base tabs

7.Replace the side burner grates.

Hook up to Natural gas and Leak Test

1.Use pipe wrench to connect certified ¹⁄₂" (1.3 cm) gas supply pipe to inlet side of regulator from Natural gas supply according to local codes requirements. Use pipe thread sealant that is certified for use with LP gas at connections where required. There must be a certified manual shutoff valve in the gas supply line near the grill for easy access.

2.Turn on the gas supply to the grill.

3.Test all connections using an approved noncorrosive leak- detection solution. Bubbles will show a leak. Correct any leak found.

Record Conversion

1.The appliance nameplate is located inside the grill cabinet on the right-hand cabinet side. With a permanent marker, check the box next to “Natural gas” and mark through “LP - Propane.”

In the last page of the Use and Care Guide, write “Converted to Natural Gas.” Also record the conversion date and the technician/company that performed the conversion.

NOTE: Place LP gas parts in plastic parts bag for future use and keep with pack containing literature.

Check and Adjust the Burners

The burners are tested and factory-set for most efficient operation. However, variations in gas supply and other conditions may make minor adjustments to low flame setting necessary.

It is recommended that a qualified person make burner adjustments.

³⁄₄" - 1"

(1.9 - 2.5 cm)

on all burner ports with burners on "HI" setting

19

Page 18 Page 20
Page 19
Image 19
KitchenAid KBZU122TSS Check and Adjust the Burners, Change the Side burner orifices, Hook up to Natural gas and Leak Test
Page 18 Page 20

W10176789A, KBZU122TSS, KBZU122VSS, KBZU242VSS specifications

The KitchenAid KBZU242VSS, KBZU122VSS, KBZU122TSS, and W10176789A are a series of impressive kitchen appliances designed to enhance your culinary experience. These products appeal to both amateur and professional chefs due to their innovative features, advanced technologies, and sleek design.

The KBZU242VSS is a built-in refrigerator that offers an impressive combination of style and functionality. It boasts a spacious capacity optimized for convenient organization. The design includes adjustable glass shelves and a customizable door bin system, allowing you to create a layout that suits your storage needs. One of its standout features is the ExtendFresh technology, which ensures that all your food items are stored at the ideal temperature to maintain freshness.

Next, the KBZU122VSS is known for its compact size, making it perfect for smaller kitchens or as an additional cooling solution wherever you need it. With a stylish stainless steel finish, it seamlessly integrates into any kitchen decor. Its Energy Star rating reflects its efficient power consumption, making it an eco-friendly choice. The interior layout includes removable shelving and a dedicated crisper drawer for fruits and vegetables, ensuring that your produce stays fresh longer.

The KBZU122TSS shares many features with its counterpart but may include additional customizable options or slightly varied designs, catering to diverse consumer preferences. This model emphasizes flexibility, allowing chefs to maximize their kitchen space without sacrificing functionality. The bright LED lighting inside provides excellent visibility, making it easy to find items even in densely packed storage.

Finally, the W10176789A is not just an accessory but a significant upgrade for your kitchen. This model is designed for seamless compatibility with various appliances, enhancing their overall performance. Whether it's improving temperature regulation or streamlining your cooking process, it has been engineered with precision in mind.

In summary, the KitchenAid KBZU series, featuring the KBZU242VSS, KBZU122VSS, KBZU122TSS, and the W10176789A, represents a range of high-quality kitchen appliances that prioritize efficiency, adaptability, and style. Their unique features and innovative technologies provide users with smart and practical solutions for all their cooking and cooling needs. Ideal for enhancing any kitchen, these appliances are a testament to KitchenAid's commitment to quality and design excellence.
Top Page Image Contents