Chapter 4 Recording & Playback
3 Press the TIMER SEL button, to select the type of user bits you want to display. Each time you press the TIMER SEL button switches between the following indications in the display panel for the playback port for which the setting is currently being made: LTC and VITC.
When LTC appears, the LTC user bits are displayed, and when VITC appears, the VITC user bits are displayed.
4-2-5 Adjusting Playback Audio Levels
After choosing a playback port, if the AUDIO REC/PB LEVEL adjustment control is pressed so that the PRESET indicator lights, the audio signal is played back at the preset reference level (shown as reference 0 dB for an input of +4 dBm).
For details of how to set the reference output level for the preset level (changing head room), refer to the Installation Manual.
To adjust the playback level manually
For each channel, press the AUDIO REC/PB LEVEL adjustment control, so that the PRESET indicator goes off, then adjust to the desired level.
Used for Controlling Playback
Operations
Use the following procedure to determine whether you should use the optional control panel
1 With the PORT SELECT buttons, select the playback port to which the setting applies.
2 Press the REMOTE button, turning it on or off. When lit:
The unit is controlled from the
When off:
This unit is controlled from the optional control panel
4-2-7 Remotely Controlling the
Video Processor
This section explains how to control the internal digital video processor with the HD Digital Video Controller
1 Connect the HD Digital Video Controller HKDV- 503/900 to the VIDEO CONTROL connector (D- SUB
For details, refer to the
2 Press the PROCESS CONTROL button to select REMOTE. The button lights.
3 Press the D2 button on the HD Digital Video Controller
Note
•The HD Digital Video Controller
•With the
adjusted
For details about the setup menu, refer to Section
