Sony MAV-555SS operation manual 28 E 3-4 Setup

Expansion menu items (Continued)

	Item number	Display indication	Settings		Description
	222	DEFAULT GATEWAY	This item specifies the Ethernet* interface default gateway.
		SUB MENU
		BYTE1	0 .. 255
		BYTE2
		BYTE3
		BYTE4
	223	GPI INPUT CONFIGURATION	When GPI CONFIG MODE (menu 225) is “CONFIG,” this item specifies the function
	BI		for the GPI pins.
		SUB MENU
		PIN 1 .. 8 PORT	This item specifies the effect of the set function on each port input pin.
		PIN 18 .. 25 PORT	• When the function is not FILE+, FILE-, RECED
		PIN 34 .. 41 PORT
				Setting		1 input/3 output	2 input/2 output	3 input/1 output	1 input/1 output
Chapter3									(SS mode)
				2		P1	P1	P1	P1
				1		R1	R1	R1	R1
Preparations				3		P2	R2	R2	Invalid
				4		P3	P2	R3
			• When the function is FILE+, FILE-, RECED
				Setting		1 input/3 output	2 input/2 output	3 input/1 output	1 input/1 output
									(SS mode)
				1		RP(BVE mode) P1(Panel mode)			P1 (Panel mode)
				2		P2	P2	Invalid	Invalid
				3			R2
		PIN 1 .. 8 FUNCTION	This item specifies the function of the GPI input pins. Also, when GPI CONFIG MODE
		PIN 18 .. 25 FUNCTION	(menu 225) is “CONFIG,” this item specifies the function for the GPI input pins.
		PIN 34 .. 41 FUNCTION	NOP		: No operation.
			STOP		: Executes the STOP command.
			PLAY		: Executes the PLAY command.
			REC		: Executes the REC command.
			FF		: Executes the Fast Forward command.
			REW		: Executes the Rewind command.
			TOP		: Executes the CueUp SOF command.
			END		: Executes the CueUP EOF command.
			STP+1		: Executes the STEP+1 command.
			STP-1		: Executes the STEP-1 command.
			ST+10		: Executes the STEP+10 command.
			ST-10		: Executes the STEP-10 command.
			ULOAD		: Executes the UNLOAD command.
			REMOT		: Executes REMOTE (for REMOTE/LOCAL).
			LOCAL		: Executes LOCAL (for REMOTE/LOCAL).
			REC1F		: Executes 1-frame recording.
			SOFPL		: After executing the CueUp SOF command, executes the PLAY command.
			FILE+		: Executes file switch in the + direction.
			FILE-		: Executes file switch in the - direction.
			FILE+/FILE- can be used with
			• The playback port in the PANEL mode
			• Port P2 in the DTR+PANEL mode
			• The playback port in the BVE mode.
			RECED		: Stops on the R2 port, switches files. (BVE mode)
			TOPFL		: Switches to the beginning of the file list.

* “Ethernet” is a registered trademark of the Xerox Corporation.

3-28 (E) 3-4 Setup