Expansion menu items (Continued)
Item number | Display indication | Settings | Description | |||
|
|
|
|
|
| |
768 | H BLANKING WIDTH P1 | These items select the horizontal blanking width for the video output signal. If | ||||
769 | H BLANKING WIDTH P2 | analog blanking was selected, the horizontal blanking width conforms with the | ||||
770 | H BLANKING WIDTH P3 | RS170A. The wider the blanking width, the narrower the picture is. | ||||
BI |
| narrow |
| : Digital blanking (narrow) | ||
|
| wide |
| : Analog blanking (wide) | ||
|
|
|
|
|
| |
778 | SELECTION OF VIDEO/SYNC | Selects the video output phase that is set for PB/EE on the 013 Setup menu. | ||||
BI | DELAY MONITOR | VIDEO DELAY | : Ignores video signal delays and adds the same sync as the output ref | |||
|
|
|
|
|
| to the video output. In this case, the picture moves downward when |
|
|
|
|
|
| in EE mode. |
|
| SYNC DELAY | : Adds a sync signal that is offset to match the video signal delay. | |||
|
|
|
|
|
| |
779 | VAR CONROL P1 | These items set up the video process. | ||||
780 | VAR CONROL P2 |
|
|
|
|
|
781 | VAR CONROL P3 |
|
|
|
|
|
BI |
|
|
|
|
|
|
SUB MENU |
|
|
|
|
| |
| Y ADD | This item specifies whether to forcibly turn Y ADD off in a playback mode other than | ||||
|
| normal playback mode (JOG, VAR, SHUTTLE, STILL, etc.). | ||||
|
| auto |
| : Perform Y ADD automatically in any playback mode other than normal | ||
|
|
|
|
| playback mode. | |
|
| off | : Forcibly turn Y ADD off in any playback mode other than normal | |||
|
|
|
|
| playback mode. | |
|
|
|
|
|
| |
| ESR | When recording or playing back a composite signal, this item specifies whether to | ||||
|
| automatically turn the edge subcarrier reducer on/off in accordance with the playback | ||||
|
| mode, or to force the edge subcarrier reducer on (in order to play back a | ||||
|
| signal). |
|
| ||
|
| auto |
| : Turn the edge subcarrier reducer on/off in accordance with the playback | ||
|
|
|
|
| mode. | |
|
| on | : Force the edge subcarrier reducer on. | |||
|
|
|
|
|
| |
782 | INTERNAL SIGNAL | These items select the test signal that is output from the internal signal generator. | ||||
| GENERATOR R1 | When off: |
|
| ||
783 | INTERNAL SINGAL | No test signal is generated, and the unit operates normally. | ||||
| GENERATOR R2 | When not off: |
| |||
784 | INTERNAL SINGAL | If an INPUT SELECT switch is held down for at least three seconds while lit, all INPUT | ||||
| GENERATOR R3 | SELECT switches light and the internal signal generator operates. The selected test | ||||
|
| signal is input to the REC port. It is also possible to record this signal. | ||||
|
| off | : No test signal is generated. | |||
|
| CB100 | : 100% color bar signal | |||
|
| CB75 | : 75% color bar signal | |||
|
| CB75R | : 75% color bar (reverse) signal | |||
|
| BOW | : Bowtie signal | |||
|
| PLSBR | : Pulse and bar signal | |||
|
| MLTBS | : | |||
|
| HSWP | : HSWP signal (available only in 525 mode) | |||
|
| 5STEP | : | |||
|
| RAMP | : Ramp signal | |||
|
| SH | : Shallow ramp signal | |||
|
| RED | : Full red signal | |||
|
| GRAY | : 50% flat signal | |||
|
| WHITE | : 100% flat signal | |||
|
| BB | : Black burst signal | |||
|
| SDI | : SDI check field signal | |||
|
| NTC7 | : NTC7 test signal (available only in 525 mode) | |||
|
| LN330 | : Line 330 test signal (available only in 525 mode) | |||
|
|
|
|
|
| |
785 | INPUT VIDEO BLANK R1 | These items turn blanking during the input video signal vertical blanking interval | ||||
786 | INPUT VIDEO BLANK R2 | on and off. |
|
| ||
787 | INPUT VIDEO BLANK R3 |
|
|
|
|
|
BI |
|
|
|
|
|
|
SUB MENU |
|
|
|
|
| |
|
|
|
|
|
|
|
Chapter 3 Preparations