Sony MAV-555SS operation manual DTR + DTR Mode SD mode only

DTR + DTR Mode (SD mode only)

This mode allows two cameras to be used for a live relay, with replay and slow- motion playback during recording.

Chapter 3

Sync Generator

Video Camera

REF.

REF.

Dynamic Motion Controller

DTR-3000

Monitor

RS-422

	R1	P1	VIDEO	REMOTE
			INPUT
PORT SELECT
	R2/	P2
	P3

HELP	monitor
MENU

Preparations

SDI/Composite	SDI/Composite
	SETUP
CONTROL PANEL	SELECT PANEL SELECT CHARACTER

REF.MAV-555SS

RS-422

Dynamic Motion Controller

DTR-3000

Configuration example

In this mode, the two groups of ports R1/P1 and R2/P2 are controlled from two DTR-3000 units.

Use the basic menu item LIVE DURATION (menu 034) to set the recording time for ports R1 and R2.

For details on basic menu settings and operation sequences, refer to Section 3-4, “Setup” (page 3-18).

Notes

•When a DTR-3000 is used with this unit, it must be version CP:V01.30, VS:V01.20 or later, and this unit must be used in the DISK:INDIVIDUAL mode. For details, please contact the supplier of the unit or your Sony representative.

•To change from another operation mode to this mode, execute the -ALL ERASE (menu 099) basic menu item and then reboot.

•When the LIVE DURATION time value is changed, or when recording from the beginning of the recording area, existing material must be erased. Delete the “LIVE1” (and “LIVE2”) material in the Panel mode and reboot to this mode, or reboot after erasing all material using the -ALL ERASE (menu 099) basic menu item.

•Material recorded in this mode will be erased when this mode is again selected from the Panel mode.

3-6 (E) 3-1 MAV-555SS Modes