Sony MAV-555SS operation manual Error Messages

Appendixes

Error Messages

If a malfunction or internal system error/warning occurs and the MAV-555SS unit fails to function properly, the SYSTEM indicator or HDD indicator on the front panel lights up red. In addition, when an error occurs, an error message immediately appears on the time data display on the front panel. When a warning occurs, you can check the details by pressing the HELP button.

If an error or warning occurs, refer to the list below and, if a remedy is indicated, follow the instructions given. Errors and warnings can often be corrected by turning the POWER switch off and then back on again.

If an error or warning still occurs after restarting the unit, please contact the company from which you purchased the unit.

Error

Power Trouble

Meaning: Detected a malfunction in the power supply unit.

Power supply may be defective.

EM Board Not Respond

Meaning: Normally: Detected a malfunction in communications between the EM-3 Board and other boards. Thought to be an EM-3 Board malfunction.

When booting:Failed to boot the EM-3, DM- 127, or FM-81 board. A board may be defective.

FM Board Not Respond

Meaning: Detected a malfunction in communications between the FM-81 Board and other boards. The FM-81 Board may be defective.

R1 Port Not Respond

Meaning: Detected a malfunction in communications between R1 port control and other boards. The DM-127 Board may be defective.

R2 Port Not Respond

Meaning: Detected a malfunction in communications between the R2 port control area and other boards.

The DM-127 Board may be defective.

R3 Port Not Respond

Meaning: A communications problem was detected between the R3 port controller and the other boards.

The DM-127 Board may be defective.

P1 Port Not Respond

Meaning: An abnormality has been detected in a data transfer between the P1 port control area and another board.

The DM-127 Board may be defective.

P2 Port Not Respond

Meaning: Detected a malfunction in communications between P2 port control and other boards. The DM-127 Board may be defective.

P3 Port Not Respond

Meaning: A communications problem was detected between the P3 port controller and the other boards.

The DM-127 Board may be defective.

SLOT3 Not Respond

Meaning: Detected a malfunction in communications between the optional BKMA-540 and some other board.

The BKMA-540 may be defective.

Appendixes

Error Messages A-1 (E)