Chapter 2 Names and Functions of Parts
SDI (SUPER) connector
This outputs a serial digital video/audio signal.
The audio output signals output by this connector are as follows:
CH1: Audio monitor output. Same as the Lch signal.
CH2: Audio monitor output. Same as the Rch signal.
CH3: No output
CH4: No output
If the CHARACTER switch on the system setup panel is set to ON, timecode information and menu settings appear as text superimposed on the video signal.
ANALOG (COMPOSITE) (SUPER) connector
This outputs an analog composite video signal. If the CHARACTER switch on the system setup panel is set to ON, timecode information and menu settings appear as text superimposed on the video signal.
lDSK IN connectors
When the optional
mSDTI CP connectors
These connectors cannot be used.
nSDI IN (Serial Video/Audio Input) connectors (BNC type)
The left jack inputs serial digital video/audio signals. When the power is on, signals that are input to the jack on the right is output through an internal circuit, making a bridge connection possible in SD mode. A maximum of three inputs are available.
oSDI OUT (Serial Video/Audio Input) connectors (BNC type)
These jacks output serial digital video/audio signals. A maximum of three outputs are available.
pGround terminal
Connect to ground as required.
q- AC IN connector
Connect to a power outlet using the power cord (1-
