Sony MAV-555SS Processor adjustment ranges, Input connectors, Output connectors, Video system

Wow and flutter Unmeasurable

Headroom 20 dB (or 18 dB, 16 dB, 14 dB, 12 dB, 15 dB, 9 dB, selectable)

Analog input/output

(with optional BKMA-513 installed) A/D, D/A Quantization

	20 bits/sample
Frequency characteristics
	20 Hz to 20 kHz +0.5 dB/-1.0 dB (0 dB,
	1 kHz)
Dynamic range	95 dB or more
	(1 kHz, emphasis on, 20 bits/sample)
	90 dB or more
	(1 kHz, emphasis on, 16 bits/sample)
Distortion	0.05% or less
	(1 kHz, emphasis on, +4 dBm, 600 Ω)
Cross-talk	-85 dB or less
	(1 kHz, between channels, 20 bits/
	sample)
	-80 dB or less
	(1 kHz, between channels, 16 bits/
	sample)
Input reference level
	+4 dBm (+4/0/-3/-20 dBm, selectable)
Emphasis	T1 = 50 µs, T2 = 15 µs
	(on/off selectable during recording)

Processor adjustment ranges

Video system

Recording level ±3 dB/-∞to +3 dB, selectable Chrominance level

±3 dB/-∞to +3 dB, selectable Setup/black level

±30 IRE/±210 mV

Hue/chrominance phase ±30°

System phase COARSE: ±30 µs (37 ns steps) FINE: 0 to +37 ns (0.14 ns steps)

Audio system	-∞to +12 dB
Input level
Output level	-∞to +12 dB

Input connectors

SDI INPUT BNC (2, active loop-through) ×3 ports Serial digital (270 Mbits/s)

SMPTE 259M/CCIR 656-III REF. VIDEO INPUT

BNC (2, loop-through)

black burst or composite sync

0.3 Vp-p, 75 Ω, (automatic termination)* synchronized load

COMPOSITE VIDEO INPUT

BNC (2, loop-through) ×2 ports

1.0Vp-p, 75 Ω, (automatic termination)* synchronized load

(with optional BKMA-513 installed)

AUDIO INPUT (AES/EBU) CH1/2, CH3/4 BNC (2) ×2 ports

Complies with AES-3id-1995

ANALOG AUDIO INPUT

XLR, 3-pin, male (4) ×2 ports

LOW OFF: -60 dBu, high impedance, balanced

HIGH OFF: +4 dBu, high impedance, balanced

HIGH ON: +4 dBm, 600 Ω termination, balanced

(with optional BKMA-570 (J) connected)

TIME CODE IN

BNC (1) ×2 ports

0.5 to 18 Vp-p, 3.3 kΩ, unbalanced

TIME CODE IN (SYSTEM) BNC (1)

0.5 to 18 Vp-p, 3.3 kΩ, unbalanced

*When the cable is not connected to the loop-through out

connector, loop-through is automatically terminated (at 75 Ω). When the cable is connected, termination goes off.

Output connectors

SDI OUTPUT BNC (2) ×3 ports

Serial digital (270 Mbits/s) SMPTE 259M/CCIR 656-III

VIDEO MONITOR OUTPUT (SDI)

BNC (1), with superimposed character information, SMPTE /CCIR 656-III

COMPOSITE VIDEO OUTPUT

BNC (2) ×3 ports, character superimposition provided (B only)

1.0 Vp-p, 75 Ω , negative synchronization

(when the optional BKMA-513, sold separately, is installed)

VIDEO MONITOR OUTPUT (COMPOSITE)

BNC (1), with superimposed character information

1.0 Vp-p, 75 Ω, synchronized load

Appendixes

Specifications A-5 (E)