ENGLISH
When selecting the VIRTUAL SPEAKER SETUP
Press the CURSOR UP()/DOWN() buttons to select the VIRTUAL SPEAKER SETUP, then press
1 | the ENTER button. |
|
| V I R T U A L S P E A K E R S E T U P | |
| D O L B Y | V S : Off |
| S P E A K E R L A Y O U T : | |
|
| 2 - SP E A K E R |
| MO D E : |
|
|
| W I DE |
| R E T U R N : B a c k | , : S e l e c t |
Press the CURSOR LEFT()/RIGHT( ) buttons to select the DOLBY VS(Virtual Speaker) mode as
2 desired.
• Each time these buttons are pressed, the Dolby Virtual Speaker mode changes as follows :
On : Select this to activate the Dolby Virtual Speaker function.
Off : Select this to cancel it.
Press the CURSOR UP()/DOWN()
3 buttonsmode. to select the SPEAKER LAYOUT
Press the CURSOR LEFT( )/RIGHT()
4 buttons to select the desired mode.
•You can select the desired one of four speaker layouts for actual speakers to be used .
•Each time these buttons are pressed , the speaker layout mode changes as follows :
2- SPEAKER : Select this when using 2 front speakers.
3- SPEAKER : Select this when using 2 front and center speakers.
4- SPEAKER : Select this when using 2 front and 2 surround speakers.
5- SPEAKER : Select this when using 2 front, center and 2 surround speakers.
Note :
•When the speakers are set to “None”, the corresponding speaker layout modes cannot be selected.
52