Sherwood R-865 When selecting the OSD AUTO DISPLAY, When selecting the CURRENT VIDEO, English

	When selecting the OSD AUTO DISPLAY	Press the CURSOR LEFT( )/RIGHT( )
		2 buttons to select the desired mode.
• When the OSD AUTO DISPLAY is set to On, the

current status display overlaps the program image on the monitor TV and may interfere with your movie enjoyment. In such a case, set the OSD AUTO DISPLAY to Off.

Press the CURSOR UP()/DOWN()

1 buttons to select the OSD AUTO DISPLAY.

	• Each time these buttons are pressed, the mode
	changes as follows:
	On : To turn on the current status display.
	Off : To turn off the current status display.
When selecting the CURRENT VIDEO	Press the CURSOR LEFT( )/RIGHT( )
	2 source.buttons to select the desired video input
• You can select a video input source on the OSD
menu and enjoy its image.
Press the CURSOR UP( )/DOWN(	)
1 buttons to select the CURRENT VIDEO.

• Each time these buttons are pressed, the video input source changes.

When selecting the COMPONENT VIDEO SETUP

•You should assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1~4. (For details, refer to “CONNECTING VIDEO COMPONENTS” on page 6~7.)

Press the CURSOR UP()/DOWN() buttons to select the COMPONENT VIDEO SETUP, then press

1	the ENTER button.
	C OM P ON E N T V I D E O S E T U P
	V I D E O 1	:	I N 1
	V I D E O 2	:	I N 2
	V I D E O 3	:	None
	V I D E O 4	:	None
	R E T U R N : B a c k		, : S e l e c t

ENGLISH

59