Sherwood R-865 manual When selecting the CHANNEL LEVEL TRIM, English

Press the CURSOR UP( )/DOWN(	)
2 buttons to select the desired channel.

•Each time these buttons are pressed, “” is moved to the corresponding channel.

Note :

•Depending on the speaker settings and surround mode, etc., some channels cannot be selected.

Press the CURSOR LEFT()/RIGHT( )

3 buttons to adjust the level of the selected channel as desired.

•Each time these buttons are pressed, the channel level can be adjusted within the range of -15~+15 dB.

ENGLISH

4	Repeat the above steps	and	to adjust each channel level until the sound level of each speaker
	is heard to be equally loud.

When selecting the CHANNEL LEVEL TRIM

•You can adjust the current channel levels as desired. These adjusted levels are just memorized, not into preset memory.

1	Press the CURSOR UP( )/DOWN( ) buttons to select the CH LEVEL TRIM, then press the
	ENTER button.
		C H	L E V E L T R I M
	F L	: - - - -	- -	- - - - - - : 0 dB
	F C : - - - -		- -	- - - - - - : 0 dB
	F R : - - - -		- -	- - - - - - : 0 dB
	S R : - - - -		- -	- - - - - - : 0 dB
	B R : - - - -		- -	- - - - - - : 0 dB
	B L : - - - -		- -	- - - - - - : 0	dB
	S L : - - - -		- -	- - - - - - : 0	dB
	SW : - - - -		- -	- - - - - - : 0	dB
	R E T U R N : B a c k			, : S e l e c t

Preform the steps ~ in “When selecting the PRESET 1 TRIM or PRESET 2 TRIM” procedure on

2 the previous page.

•You can memorize the current channel levels into preset memory with performing “When selecting the PRESET 1 or PRESET 2 ” procedure on the previous page.

67