ENGLISH
When selecting the TONE CONTROL
Press the CURSOR UP(
)/DOWN(
) buttons to select the TONE CONTROL, then press the
1 | ENTER button. |
|
|
|
|
|
|
| TON E | C O N T R O L |
|
|
| ||
| C I N EMA | E Q | : | Off |
|
| |
| T O N E | D E F E A T | : | Off |
|
| |
| B A S S | 0 | dB | ||||
| T R E B L E | 0 | dB | ||||
| R E T U R N : B a c k | , : S e l e c t | |||||
Note:
•When the pure audio function is activated, the TONE CONTROL cannot be selected.
2
3
Press the CURSOR UP(
)/DOWN(
) buttons to select the desired item.
• Each time these buttons are pressed, “
” and “
” are moved to the corresponding mode.
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired mode.
• Each time these buttons are pressed, the modes change as follows:
When CINEMA EQ mode is selected
•When the pure audio function is activated, the cinema EQ function cannot be activated.
On : Select this to compensate for edgy or shrill movie sound tracks.
Off : Select this to cancel the cinema EQ function.
When TONE DEFEAT mode is selected
On : Select this when listening to a program source without the tone effect.
Off : Select this when adjusting tone for your taste.
Note :
•When the tone defeat mode is set to On, the tone (bass and treble) cannot be adjusted.
When the tone defeat mode is set to Off to adjust the tone (bass and treble)
1.Press the CURSOR UP(
)/DOWN( 
) buttons to select the desired tone mode.
2.At the desired tone mode, press the CURSOR
LEFT(
)/RIGHT(
) buttons to adjust the selected tone as desired.
•The tone level can be adjusted within the range of
•In general, we recommend the bass and treble to be adjusted to 0 dB(flat level).
•Extreme settings at high volume may damage your speakers.
3.To complete tone adjustment, repeat the above steps 1 and 2.
58
