Sherwood R-865 manual When selecting the LFE LEVEL TRIM, English

ENGLISH

When selecting the LFE LEVEL TRIM

Press the CURSOR UP()/DOWN() buttons to select the LFE LEVEL TRIM, then press the ENTER

1	button.
		L F E L E V E L T R I M
	D O L B Y - - - - - +		0 dB
	D T S	- - - - - - -	- - - + 10 dB
	M P E G	- - - - - + -	- - - - 0 dB
	R E T U R N : B a c k		, : S e l e c t

2

3

Press the CURSOR UP()/DOWN() buttons to select the desired LFE level mode.

•Each time these buttons are pressed, “ ” is moved to the corresponding LFE level mode.

Press the CURSOR LEFT( )/RIGHT( ) buttons to adjust the selected LFE level as desired.

• Each time these buttons are pressed, the LFE level can be adjusted within the range of either -10~0 dB for Dolby Digital program sources or -10~+10 dB for DTS and MPEG program sources.

•In general, we recommend the LFE level for Dolby Digital program sources to be set at 0 dB and at +10 dB

for DTS program sources.(However, the recommended LFE level for some early DTS program sources is 0 dB.) If the recommended levels seem too high, lower the setting as necessary.

Repeat the above steps	and	until each level is adjusted as desired.
4

68