Sherwood R-865 manual ROOM 2 SOURCE PLAYBACK, English

ENGLISH

ROOM 2 SOURCE PLAYBACK

•This function allows enjoying one source in the main room and playing another in a different room at the same time.

•The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs as well as the digital signals from the coaxial or optical digital input cannot be output from the (VIDEO 2/) ROOM 2 OUTs, meaning no playback in a different room.

•When you connect the multi-room system kit to the IR IN jack of this unit, you can control this unit with not only the universal remote control unit but also the ROOM2 remote control unit in a different room, too.

(For details, refer to “CONNECTING MULTI-ROOM SYSTEM KIT” on page 12 and “ROOM 2 Romte controls” on page 27.)

CAUTION : Even when the ROOM 2 function is deactivated, if the VIDEO 2 OUT is set to On, the signals of the selected source as a main room source will be output from the VIDEO 2/ROOM 2 OUTs.(For details, refer to “When selecting the VIDEO 2 OUT” on page 60.)

When using the ROOM 2 remote control unit				When using the universal remote control unit or the
• You can use the ROOM 2 function with the ROOM 2				buttons on the front panel.
remote control unit more conveniently.				1	Press the ROOM 2 button.
1	Press the ROOM 2 button.	ROOM2
					or
• “R2” lights up and “(R2)~” is displayed for several
seconds and the ROOM 2 function is activated.
• To cancel the ROOM 2 function, press it again.
Then “R2” goes off.				• “R2” lights up and “(R2)~” is displayed for several seconds
• In the operating mode, when one of the ROOM 2
				and the ROOM 2 function is activated.
INPUT SELECTOR buttons on this remote control				• To cancel the ROOM 2 function, press it again.
is pressed, the ROOM 2 function is automatically
				Then “R2” goes off.
activated without pressing the ROOM 2 button and				• You can cancel the ROOM 2 function with using these
the desired input is selected.
				buttons even in the standby mode.
2	Select the desired			2	Select the desired input as a ROOM 2 source
	input as a ROOM 2	CD	TUNER		while displaying “(R2)~”.
	source.	AUX	AUDIO
		VIDEO 1 VIDEO 2	VIDEO 3
		VIDEO 4
• The selected ROOM 2 source is			VIDEO
displayed for several seconds as					or
follows: (R2) TUNER, (R2) CD,
(R2) AUX, (R2) VIDEO 1~4.
• Only these sources can be played in another room.
• When an audio program source is selected, as a ROOM 2
source, the image of the video program source selected
previously can be played separately, too. (For details, refer
to “ SETTING THE ROOM2 FEED SETUP” on page 69.)
• The MUTE and VOLUME UP/DOWN( /		) buttons on		• The selected ROOM 2 source is displayed for several
this remote control can be available only when the ROOM 2				seconds.
function is operating.				• Only while displaying “(R2)~”, the volume level for the
Note:				ROOM 2 source can be adjusted.
• When the muting effect for the ROOM 2 source is operating,				• When “(R2)~” is not displayed, press the ROOM 2 button
“MUTE” is flickering.				briefly twice.
3	Start play on the component related to the			3	Start play on the component related to the
	ROOM 2 source.				ROOM 2 source.

Notes:

•When the pure audio function is activated for the main room source, the video signals of the ROOM 2 source cannot be output, too.

•Even when this receiver enters the standby mode, in such a case that “R2” lights up still and the STANDBY button lights up in blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently.

•When the ROOM 2 function is operating in the standby mode, only the ROOM 2 remote control unit is available.

•When you do not use the ROOM 2 function, cancel the ROOM 2 function to save electricity.

•For ROOM 2 volume adjustment, refer to “SETTING THE ROOM 2 FEED SETUP” on page 69.

46