ENGLISH
Universal Remote Controls
This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as CD players, tape decks, TVs, cable boxes, VCRs, DVD players, satellite receivers, etc.
•To operate 7 components other than this receiver, you should enter the setup code for each component. (For details, refer to “USING FUNCTIONS OF REMOTE CONTROL” on page 19.)
•The numbered buttons on the remote control have different functions in different device modes. For details, refer to “FUNCTION TABLE of the NUMBERED BUTTONS” on the next page.
POWER ON button
SLEEP button
TEST TONE button
CHANNEL SELECTOR button
CHANNEL/ADJUST UP/DOWN(/) buttons
DOLBY PL II MUSIC PARAMETER button
DISPLAY button
PRESET TUNING
DSP MODE UP/DOWN( / ) buttons
DECODING MODE button
SURROUND A/B button
DIGITAL/ANALOG button
NUMERIC(0~9, +10, +100) /
INPUT SELECTOR buttons
To select the desired input source of TUNER~8 CH DIRECT IN.
MACRO(M1~M3) buttons
To operate a macro function, press the corresponding MACRO button.
LCD SCREEN
STANDBY button
DEVICE buttons
To operate the desired component with this remote control, first select the corresponding DEVICE button.
DIMMER button
ROOM 2 button
VOLUME UP/DOWN(/) buttons
MUTE button
OSD button
CURSOR CONTROL( , , , )/
ENTER buttons
RETURN button
TUNING
PRESET SCAN button
STEREO button SURROUND BACK button
PURE AUDIO button
DECODING MODE buttons
LIGHT button
Activates the backlighting of the remote control for about 20 seconds. If only other button is pressed while the backlighting is on, the remote control will remain backlight for an additional period.
16