Sherwood R-865 manual English, Perform the steps and in “Entering a

ENGLISH

Erasing all the punch-through functions programmed under a master device mode

Perform the steps and in “Entering a

1 setup code” procedure on page 19 to select a master device and the punch-through mode (“PUNCH”).

•Then “VOL” is displayed on the LCD screen for several seconds.

While “DELETE” is displayed, to erase all

3 the punch-through functions programmed under the master device mode, press ENTER button.

•Then “OK” is displayed and “DELETE” is displayed.

•To exit from the deleting mode, press any of the DEVICE buttons.

While “VOL” is displayed, press the

2 CURSOR UP()/DOWN() buttons to select the all punch-through deleting mode (“DELETE”).

•Each time the CURSOR UP( )/DOWN() buttons are pressed, the mode changes as follows:

VOL DELETE PLAY CH

•Then “DELETE” is displayed .

To erase all the punch-through functions

4 programmed under other master device mode , repeat the above steps to .

26