Sherwood R-865 manual When selecting the Panorama mode, When selecting the Center Width control

When selecting the PL IIx MUSIC PARAMETER(or the PL II MUSIC PARAMETER)

Notes:

•Depending on whether “S/B CH” is set to “None” or not, you can select either the Dolby Pro Logic II surround or the Dolby Pro Logic IIx surround and can adjust its parameters as desired only while listening in either the PL II MUSIC mode or the PL IIx MUSIC mode.

(Refer to “When selecting the SPEAKER CONFIGURATION” on page 49.)

•In case of PL IIx MUSIC mode, only when original surround mode is “BYPASS” mode or 2 channel digital signals from Dolby Digital sources, etc. are input, these parameter settings affect the surround effects.

Press the CURSOR UP( )/DOWN() buttons to select the PL II(x) MUSIC PARAMETER, then press

1	the ENTER button.
	P L I I x MU S I C P A R A M E T E R
	P A N OR A M A : Off
	C E N T E R W I D T H	+ ------- 0
	D I M E N S I O N	- -- - + -- 0
		-	0 +
	R E T U R N : B a c k		, : S e l e c t

ENGLISH

Press the CURSOR UP( )/DOWN()

2 buttons to select the desired parameter.

3	Press the CURSOR LEFT( )/RIGHT( )
	desired.buttons to adjust the selected parameter as

When selecting the PANORAMA mode

This mode extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side wall imaging. Select “Off” or “On”(default value:Off).

When selecting the CENTER WIDTH control

This adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom image, or from all three front speakers to varying degrees.

The control can be set in 8 steps from 0 to 7(default value : 0).

When selecting the DIMENSION control

This gradually adjusts the soundfield either towards the front or towards the rear. The control can be set in 7 steps from -3 to +3(default value : 0).

4

Repeat the above steps and to adjust other parameters.

65