How to use the different controls
When the hob is plugged in for the first time, an audio signal sounds after a few seconds. You can then turn on the hob.
Power on
To turn on th power, hold your finger on the button 
.
Heating zone controls
Each heating zone is controlled by one of the selection buttons, whose design reflects the configuration of the heating zones themselves
8. 8.
8. 8.
and by two power level buttons :
- +
To turn on a heating zone and increase its power level, select the desired heating zone. Then adjust the power level, which is displayed in steps from 0 to 9.
To set a heating zone to maximum power immediately, press briefly on the
To accelerate the heating time of a heating zone, use the "Booster" ; Adjust the power level of the heating zone to its maximum (9).
Then press the "+" button. The Booster funtion is activated when the number 9 is replaced by "A". Choose the power level of the Booster (1 to 8).
The Booster stops automatically when the set temperature is reached.
To turn off the heating zone, press on the "+" and
or press the
To turn off the entire hob simultaneously, press the
button 
; The entire hob is turned off.
Be sure to unlock the hob before turning it off.
4 residual heat indicator lights (C)
Even after a heating zone is turned off, its residual heat indicator lights stays on to show that the corresponding heating zone is still hot (temperature over 60°C). These indicator lights warn you of the risk of injury by burning.
How to lock the controls
When the hob is on, it is possible to lock the controls so that the settings cannot be changed inavertently (due to cleaning, children playing, etc). Hold your finger over the
button 
the indicator light next to the button goes on.
To modify the power level of stop cooking, all your
need to do is press the button 
again, the indicator
light goes off.
You must the reselect the desired heating zone to reactivate the settings.
Safety features
If an object (pan, lid, etc) is left on the control zone for more than 10 seconds or a button in the controls zone is pressed for too long, an audio signal is triggered.
•To stop the audio signal, remove the object causing the interruption. The hob is now turned off.
•To reactivate the controls, follow the procedure for turning on the hob.
Models KT 6104 & 7104 only
Functioning of the double heating zones
Select the desired heating zone and press on the button corresponding to the extension (concentric or oval) to set the power level to its maximum.
To turn off the extension, just press the extension button again.
How to programme the cooking time,
It is possible to programme one heating zone (any of the four) for a duration of up to 99 minutes.
After selecting the power level, programme the cooking time as follows :
• Press on the programming button | 8.8. |
• Set the desired time with the buttons | - + |
•Validate the programme by pressing a second time the programming button.
The countdown starts immediately and continues until the end of the programmed cooking time. An audio signal indicates the end of the cooking time.
11
