Ariston KT 8104 QO manual Technical specifications, Electrical connection, Detail of wiring

Technical specifications

Electrical connection

·The electrical safety ot this appliance is guaranteed only if the appliance is correctly earthed in compliance with the standards of electrical safety. The manufacturer can under no circumstances be considered responsible for any damage that might occur due to incorrect earthing of the appliance.

·Important points

Your hob unit is supplied with a special Scholtès connection cable.

If ever the cable is damaged, it should be replaced by an authorised service engineer only.

Disconnect the appliance before any work is carried out.

Detail of wiring

-Connect the 5 wires to your machine respecting the colour of the wires and their connections.

Black Black Green / Yellow

Blue

Brown

Neutral	Live 1	Live 2	Earth
N	L1	L2

Two-phase wiring

· Fasten the appropriate standard plug for the load

indicated the rating plate to the chord. If the appliance

must be directly connected to the mains, a multipolar

switch must be installed between the appliance and the

mains. The multipolar switch must have a minimum of

3 mm of space between the contacts, be sized to the

load, and comply with current regulations (the switch

Black

Blue

Brown

Neutral

N

Black Green / Yellow

Connect the two black live wires L1 and L2

Live	Earth
L

must not be able to disconnect the earth conductor).

The supply cord must be positioned so that no part of it

reaches a temperature of 50 °C higher than room tem-

perature. Before making the connection, make sure that:

•the limiter valve and the residential wiring can support the appliance load (see rating plate);

•the mains system is properly earthed in compliance with current regulations and provisions;

•there is easy access to the socket or the multipolar switch after the appliance is installed.

Single-phase wiring
Maximum Electrical Input:
KT 6004 Q	6200W
KT 6001 H	6400W
KT 6104 QD	6200W
KT 7104 QO	7400W

				Electrical connection					Power suply - Voltage
									Fuses - Section
									AT- FR-BE-DE-GP-ES-IE- IL-IS-IT-
L					N				LU- RE-FI-GR-PT-SE-MA- NZ
									GB-DK- NL
									230 V - 1 + N ~ 50 Hz
	NOIR				BR		BL
									Fuse 20 A*
									(KT 7104 QO - Fuse 25 A *)
									FR - BE - NO
L1					L2				230 V - 2 ~ 50 Hz
									Fuse 20 A*
				NOIR BR				BL
									(KT 7104 QO - Fuse 25 A *)
									AT- FR-BE-CH-DE- ES-IL-IS-IT-LU
L1				L2	N				PT- SE-MA-NZ-DK-NL
			NOIR						400 V - 2 + N ~ 50 Hz
					BR		BL		Fuse 16 A*
									(KT 7104 QO - Fuse 20 A *)
L1				L2	L3				FR - BE -NO
									230 V - 3 ~ 50 Hz
		NOIR							Fuse 20 A*
					BR		BL
									(KT 7104 QO - Fuse 20 A *)
L1				L2	N 1	N 2			NL
									230 V - 2 +2N ~ 50 Hz
									Fuse 16 A*
	NOIR				BR		BL
									(KT 7104 QO - Fuse 20 A *)
L					N				CY-MT-AU-KW
									240 V - 1 + N ~ 50 Hz
									Fuse 20 A*
	NOIR				BR		BL
									(KT 7104 QO - Fuse 25 A *)

N:Black, BR:Brown, BL:Blue

*Application of the simultaneity coefficient in compliance with standard EN 335-2-6

Y-type connection in compliance with standard EN 335-2-6.

This appliance conforms with the following European Economic Community directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications;

-89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications;

-93/68/EEC of 22/07/93 and subsequent modifications

Attention: If the cooktop is installed above a built-in oven, the electrical connection for the cooktop must be independent of that for the oven, both for safety reasons and to facilitate the removal of the oven for maintenance, repair, etc.

10