10
ASSEMBLING THE FOOD PROCESSOR

Installing the reversible shredding disc or french fry disc

TIP: You may need to turn the disc/adapter until it drops down into place.

ASSEMBLING THE FOOD PROCESSOR

Installing the multipurpose blade or dough blade

IMPORTANT: The multipurpose blade and dough blade can only be used with the work bowl.

1Hold the french fry disc or reversible
shredding disc by the 2 finger grips with
the desired shredding side facing UP.
Insert the disc adapter into the hole in
the bottom of the disc.
2With the work bowl installed, slide the
drive adapter onto the power shaft.
Then install the work bowl cover, being
sure it locks into place.
Finger grip
Drive
adapter
1Place the blade on the power shaft.
Rotate the blade so it falls into place on
the power shaft.
2Push to lock: Press down firmly on the
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.

Adjusting the slicing thickness

NOTE: The lever only works with the

adjustable slicing disc. Changing thickness

settings with other discs or blades installed

will have no effect on operation.

1Set the desired slicing thickness by
moving the lever to the left for thinner
slices or to the right for thicker slices.
Thicker
Thinner
W10691961A_FINAL.indd 10 3/14/14 3:43 PM