4.Tighten the locking screw against the bottom collar of the 20 lb LP gas fuel tank to secure.

A

BC

A.Locking screw

B.Mounting hole

C.Bottom collar

5.Screw the gas pressure regulator/hose assembly to the 20 lb LP gas fuel tank as shown. (To disconnect, turn off the gas supply to the 20 lb LP gas fuel tank, then unscrew the gas pressure regulator/hose assembly from the 20 lb LP gas fuel tank as shown.)

connect

disconnect

B

A

A. 20 lb LP gas fuel tank

B. Gas pressure regulator/hose assembly

6.Turn on the gas supply. Wait a few minutes for gas to move through the gas line.

7.Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found.

8.Slide the tank tray back into the cabinet and lock into place.

9.The batteries are not factory installed. The 1.5-volt “D” size alkaline batteries are located in the accessory box on the grill grate. Install the batteries at this time following the instructions in the “Replacing the Batteries” section.

10.Go to “Plug in Grill” in this section.

Gas Connection to Natural Gas or Local LP Gas

WARNING

Explosion Hazard

Use a new CSA International approved “outdoor” gas supply line.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 11” (28 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

This installation must conform with local codes and ordinances. In the absence of local codes, installations must conform with either the National Fuel Gas Code ANSI Z223.1, or CAN/CGA- B149.1 Natural Gas and Propane installation code.

Copies of the standards listed above may be obtained from:

CSA International

8501 East Pleasant Valley Rd.

Cleveland, Ohio 44131-5575

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

1.Make gas connections.

A combination of pipe fittings must be used to connect the grill to the existing gas line.

If local codes permit, use an outdoor flexible stainless steel tubing gas connector, design-certified by CSA International, to connect the grill to the rigid gas supply line. A ⁵⁄₈" diameter line is recommended. Using a wrench to tighten, connect the gas supply to the grill. Use pipe- joint compound on all non-flared male threads. Do not kink or damage the flexible connector when moving the grill.

12

Page 12
Image 12
KitchenAid KFRU488VSS, KFRU368VSS, KFRU488TSS, KFRS271TSS, KFRU368TSS Gas Connection to Natural Gas or Local LP Gas

KFRU271VSS, KFRU368VSS, KFRS365TSS, KFRU365VSS, KFRU361VSS specifications

The KitchenAid KFRU488TSS, KFRU488VSS, KFRS361TSS, KFRU368TSS, and KFRS271TSS represent a range of high-performance refrigerators designed for modern kitchens that demand style, functionality, and advanced technology. Each model is fortified with unique features that cater to various culinary needs while showcasing KitchenAid's commitment to quality and innovation.

The KFRU488TSS and KFRU488VSS are distinguished by their spacious French door design, which offers unparalleled access to fresh and frozen foods. Both models feature a generous capacity, allowing users to store large quantities of groceries effortlessly. A key highlight is the Preserva Food Care System, which uses a combination of a two-tiered cooling system and humidity-controlled crisper drawers to maintain optimal conditions for different food types. This technology extends the freshness of produce and prevents cross-contamination of odors.

The KFRS361TSS and KFRU368TSS models come equipped with the signature KitchenAid salt/pepper shakers and ice dispensers, bridging practicality with design. They boast the ExtendFresh Temperature Management System that monitors and adjusts temperatures in both fresh and frozen compartments, ensuring food retains its taste and texture. Additionally, these refrigerators feature an internal water dispenser, giving convenient access to chilled water without sacrificing space on the door.

For consumers focused on energy efficiency, the KFRS271TSS stands out with its Energy Star certification, signifying lower energy consumption without compromising performance. This model also incorporates a sleek, stainless steel finish that not only complements any kitchen aesthetic but also resists fingerprints and smudges for easy maintenance.

Another commonality among these KitchenAid models is their intuitive digital controls, which allow for precise temperature regulation and user-friendly navigation of different settings. Moreover, the LED lighting illuminates every corner of the refrigerator, making it easy to locate items.

In summary, the KitchenAid KFRU488TSS, KFRU488VSS, KFRS361TSS, KFRU368TSS, and KFRS271TSS embody a fusion of style, technology, and practicality, catering to the needs of modern households. With advanced preservation systems, energy efficiency, and user-centric features, these refrigerators exemplify KitchenAid's dedication to enhancing the culinary experience.