KitchenAid KGCC505H, KGCC566H Sealed surface burners and cooktop, Cleaning the surface burners

Models: KGCC566H KGCC505H

1 23
Download 23 pages 54.17 Kb
Page 18
Image 18
Sealed surface burners and cooktop

Caring for Your Cooktop

Sealed surface burners and cooktop

Cleaning the surface burners

You should routinely remove and clean the burn- er caps. Always clean the burner caps after a spillover. Keeping the burner caps clean prevents improper ignition and an uneven flame.

For the proper flow of gas and ignition of the burner, DO NOT ALLOW SPILLS, FOOD,

CLEANING AGENTS, OR ANY OTHER MATERI- AL TO ENTER THE GAS TUBE OPENING.

Gas must flow freely through the gas tube opening for the burner to light properly. You must keep this area free of any soil and protect it from boilovers or spillovers. ALWAYS keep the burner cap in place whenever a surface burner is in use.

Let the cooktop cool before cleaning.

Do not use oven cleaners, bleach, or rust removers.

Do not obstruct the flow of combustion and ventilation air.

If the knobs are removed while cleaning, be care- ful not to spill liquids through the holes in the control area.

Be careful not to allow moisture to collect in the control area. Moisture can cause the ignitor switches to fail.

Cast-iron

burner cap Cleaning the surface burners

Alignment pins

Ignitor

Occasionally check the burner flames for proper size and shape as shown. A good flame is blue in color. If the flames are uneven, you may need to clean the

burners.

Burner base

Gas tube opening

18

Page 18
Image 18
KitchenAid KGCC505H, KGCC566H Sealed surface burners and cooktop, Cleaning the surface burners, Caring for Your Cooktop