Sears 45521 To Set Self-Clean, Cycle, Cleaning Tips, pad. The time TO INTERRUPT A CLEAN CYCLE

Models: 45520 45521

1 24
Download 24 pages 28.4 Kb
Page 14
Image 14
TO SET SELF-CLEAN

TO SET SELF-CLEAN

CYCLE:

1. Close oven door. Press the CLEAN

pad. The time TO INTERRUPT A CLEAN CYCLE:

display will show (---). See Fig. 1. You may need to

press slightly on the door.

1. Push CLEAR/OFF.

Follow InstrucUons under "WHEN A CLEAN CYCLE IS FINISHED."

Fig. 1

2.Press the UP or DOWN arrow pad to set the desired length of clean time. Clean time is normally 3 hours. You can change It between 2 and 4 hours, depending on how dlrtythe oven Is..See Fig. 2. The door locks automatically after the controls are set. The display will show "LOCK" when door locks.

Fig. 2

You can push the STOP TiME to find out when the

cycle will end. Push the CLEAN pad to return to countdown.

WHEN A CLEAN CYCLE IS

FINISHED:

t. Walt until the LOCK display goes out. The oven temperature must drop to s safe level before the door can be opened. See Fig. 3.

WAiT UNTIL LOCK GOES OUT

TO SET DELAYED SELF-CLEAN

CYCLE:

1.Close oven door. Press the CLEAN pad. The time display will show (--). See Fig. 1. You may need to press slightly on the door.

2.Press the UP or DOWN arrow pad to set the desired length of clean time. Clean time is normally 3 hours. You can change it between 2 and 4 hours, depending on how dirty the oven Is. See Fig. 2. The door locks automatically after the controls are set. The display will show "LOCK" when door locks.

3.Press the STOP TIME,

4.Set the Ume of day when you want the clean cycle to end. See Fig. 4,

The control will calculate when to start clean cycle time.

Fig. 4

Note'. When selecting a stop time for a delayed clean

cycle, you must allow Ume for the 2-4 hour clean time.

Your oven light should be OFF during a self-clean cycle to prolong the life of the bulb.

CLEANING TIPS

REMOVAL OF PACKAGING TAPE

Fig. 3

If you cannot open the door Immediately after the word LOCK goes off, walt about one minute and try again.

The safest way to remove adhesive left from packing tape on new appliances, to assure no damage Is done to the finish of the product, Is an application of household liquid dlshwashlng detergent, mineral oll or cooking o11. Apply with a soft cloth; DO NOT use a plastic pad or equivalent. Wipe dry and then apply any appliance polish to thoroughly clean and protect the surface. This procedure Is also safe for the face of microwave doors and other plsstlc parts.

NOTE: "rhe plastic t ape that is not removed from chrome trim on range parts CANNOT be removed if baked on.

13

NESCL07-2

Page 14
Image 14
Sears 45521 To Set Self-Clean, Cycle, Cleaning Tips, pad. The time TO INTERRUPT A CLEAN CYCLE, Removal Of Packaging Tape