THE SELF-CLEAN CYCLE
BEFORE A CLEAN CYCLE
1.Remove the broil pan and grid, oven racks, all utanslis and any foil that may be in the oven. Do not try to clean utensils or any other objects In the oven during a
range during a clean ¢yclej they will darkenj lose their luster and become hard to slide. If
you choose to leave the racks In the oven, you can polish the edges of the racks with steel wool and apply a small amount of vegetable oil to the rack
edges after the
2.Soil on the oven front frame, under the front edge of the cooktop, the door liner outside the door gasket and the front edge of the oven cavity (about 1" Into the oven) will not be cleaned during a clean cycle (see IIIuetretlon below). Clean these areas by hand before starting a clean cycle.
Use hot water with a
FRONI" FRAME
3.Wipe up heavy splllovers on the oven bottom. Too much soil may cause smoking during the clean cycle.
4.Do not rubthe door gssket. The fiberglass material of the gasket has an extremely low resistance to abrasion. An Intact and well fitting oven door gasket Iseasentlal for energy efflcisnt oven operetlon and good baking results. If you noUce the seal becoming worn, frayed or damaged In any way or If It has become displaced on the door, you should replace the gasket. The gasket Is designed wnh a
AFTER A CLEAN CYCLE
After a clean cycle, you may notice some white ash In the oven. Just wipe It up with a damp cloth.
If white spots remain, remove them with a
If the oven Is not clean after one clean cycle, the cycle may be repeated.
NOTE: Your oven light should be OFF during a self- clean cycle to prolong the Ilte of the bulb.
This range has a fan that will turn "ON" and "OFF" by Itself to keep the electronics cool.
Sometimes It will run after the range has been turned off.
DOOR LINER
12 |