Assembling Your Immersion Blender
1.Before using the KitchenAid® Immersion Blender for the first time, wipe the motor body and attachment adapters with a clean, damp cloth to remove any dirt or dust. Mild dish soap may be used, but do not use abrasive cleansers.
NOTE: Do not immerse the motor body or the adapters in water.
Dry with a soft cloth. Wash all the attachments and accessories by hand or in the dishwasher. Dry thoroughly.
NOTE: Always be sure to unplug the power cord from the wall socket before attaching or removing attachments.
2.Install attachments by aligning the motor body with either the blending attachment or an attachment adapter (Models KHB200 and KHB300 only). Insert the blending attachment or attachment adapter into the motor body until it locks with a click.
3.Remove the attachments by pressing both ejector buttons on either side of the body.
4. Read Operating Tips (page 13).
Blending
Attachment
Chopper Adapter
Whisk Adapter
8