Electrical Requirements
Volts: 120 A.C. only. Hertz: 60
The power rating for your Stand Mixer is printed on the trim brand or on the serial plate.
Model KSM7990 Only:
Volts | 120 |
Horsepower | 1.3 |
Hertz | 60 |
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Troubleshooting Problems
Please read the following before calling your service center.
1.The Stand Mixer may warm up during use. Under heavy loads with extended mixing time periods, you may not be able to comfortably touch the top of the Stand Mixer. This is normal.
2.The Stand Mixer may emit a pungent odor, especially when new. This is common with electric motors.
3.If the flat beater hits the bowl, stop the Stand Mixer. See “Beater to Bowl Clearance”.
If your Stand Mixer should malfunction or fail to operate, please check the following:
-Is the Stand Mixer plugged in?
-Is the fuse in the circuit to the Stand Mixer in working order? If you have a circuit breaker box, be sure the circuit is closed.
-Turn the Stand Mixer off for
back on.
If the problem is not due to one of the above items, see the KitchenAid® Warranty. Do not return the Stand Mixer to the retailer, as they do not provide service.
7