Caring for Your Gas Sealed Burner Cooktop
Control knobs
1.Make sure all control knobs are turned to OFF.
2.Pull the control knobs straight off.
3.Wash control knobs with sponge and warm, soapy water. Rinse well and dry with a soft cloth. Do not soak.
4.Replace control knobs by pushing them firmly into place.
NOTES:
•When cleaning, never use steel wool, abrasives, or commercial oven cleaners which may damage the finish. After clean- ing, make sure all control knobs
point to OFF.
•To prevent moisture from collecting in control area, do not remove seals under control knobs. Wipe up spills in control area as soon as they occur. Moisture can cause the ignitor switches to fail.
Tempered glass surface
1.Wipe with sponge and warm, soapy water or paper towel and mild glass cleaner.
2.Dry with soft cloth.
3.If soap or detergent solutions are used, rinse thoroughly to prevent filmy residue.
NOTES:
•When cleaning cooktop with knobs removed, DO NOT allow water to run down inside unit. When cleaning, never use steel wool, abrasives, or commercial oven cleaners which may damage the finish.
•When cleaning the cooktop or the area around the burner base, remove the grate but leave the burner cap in place to protect the ignitor from possible damage. If a cleaning cloth catches the ignitor, it could damage or break the ignitor. If the ignitor is damaged or broken, the surface burner will not light.
| 3 |
OFF | 4 |
| 5 |
| 6 |
| HI |
23
