KitchenAid KECC027, KECG020 The cast-iron surface units, For best results, wipe off surface units

Caring for Your Electric Cast-Iron Surface Unit Cooktop

The cast-iron surface units

1. For best results, wipe off surface units

with a damp sponge and soapy water after each use. Remove burned-on food with a nonabrasive, soap-filled scouring pad. The red spot in the center of the surface unit will gradually wash off. This is normal and will not affect the operation of the surface unit.

2.Dry the surface unit completely after cleaning. Turn on the surface unit for a few minutes to thoroughly dry.

3.After the surface unit has cooled, use a paper towel to apply a thin coat of salt-

free oil to the surface units to season and restore the finish. Wipe excess oil off trim rings.

4. Then heat 3-5 minutes. Some smoking may occur; this is normal. If surface units have dark spots caused by grease and food, the oil treatment will improve their appearance but not eliminate the spots.

NOTE: You can apply optional Electrol dressing to the surface units to improve their appearance.

To obtain order information for Electrol dressing (Part No. 814030), write to: KitchenAid

Parts Distribution Center

123 Koomler Drive

LaPorte, IN 46350

OR

Call 1-800-422-1230to order. You must have a major credit card to order by phone.

14