KitchenAid KUD01 Tech Tips, Canceling A Cycle, Changing A Cycle, Section Five, Wiring Diagram

Models: KUD01 KAD-7

1 26
Download 26 pages 9.26 Kb
Page 10
Image 10
CANCELING A CYCLE

CANCELING A CYCLE

Anytime during a cycle press:

The display shows:

2

The dishwasher starts a two minute drain (if needed.) The wash pump does not operate during this drain function. Let the dishwasher drain completely. The display turns off after two minutes.

NOTE: If the dishwasher does not need to be drained, the display turns off.

To Stop the Drain

Press Cancel/Drain a second time to stop the drain immediately. Always drain the dishwasher before starting a new cycle.

To Clear the Indicators

Press Cancel/Drain before starting the dishwasher to clear all options and cycles.

CHANGING A CYCLE

During the first fill of a cycle:

1.Press a new cycle and/or options.

2.Check the detergent dispensers. They must be filled properly for the new cycle.

After the first fill of a cycle:

1.Press:

The display shows:

2

The dishwasher starts a two minute drain (if needed.) Let the dishwasher drain completely. The display turns off after two minutes.

NOTE: If the dishwasher does not need to be drained, the display turns off.

SECTION FIVE

TECH TIPS

WIRING DIAGRAM

PTC HEATER

NOTE: Check Strip Circuits for resistance and wattage values.

6

39

Page 10
Image 10
KitchenAid KUD01, KAD-7 manual Tech Tips, Canceling A Cycle, Changing A Cycle, Section Five, Wiring Diagram