![OPTION SELECTIONS](/images/new-backgrounds/179518/17951821x1.webp)
2.Check the detergent dispensers. They must be filled properly for the new cycle.
3.Close the door.
4.Press a new cycle and/or options.
5.Press Start.
OPTION SELECTIONS
Hi Temp Scrub
Select this option to increase the target water temperature during the wash portion of the cycle. Hi Temp Scrub raises this target water temperature to 145° F (63° C)
in the Main Wash for all cycles. In the Baked On Cookware and Heavy cycles, Hi Temp Scrub also raises the target water temperature to 135° F (57° C) in the
This option adds heat and wash time by adding at least one additional rinse mode to the cycle.
NOTE: Hi Temp Scrub is an option with Baked On Cookware, Heavy and Normal Wash.
Sani Rinse
Select this option to raise the water temperature in the final rinse to approximately 160° F (70° C) for 10 minutes. Sani rinse adds heat and time to the cycle. In the Normal cycle, this high temperature rinse sanitizes the dishes and glassware in accor- dance with the NSF International requirements (#95/480/05/2480).
NOTE: The Baked On Cookware cycle automatically uses this option. Sani Rinse is an option with Heavy and Normal Wash.
Energy Saver Dry
Select this
NOTE: Energy Saver Dry is an option with all cycles, except Quick Rinse.
Control Lock
Use the Control Lock to prevent the dishwasher from accidentally being turned on. Use the Lock, also, to prevent accidental cycle or option changes during a cycle. When the Lock On Icon is lit, all buttons are disabled.
NOTES:
•The dishwasher door can be opened while the controls are locked.
•The lock can be turned on while the dishwasher is running.
To Turn on the Control Lock:
Press and hold the Air Dry button for four (4) seconds. CONTROL LOCK will glow.
38 | 7 |