KitchenAid KUDE60FVPA Prepare and Route Water Line, Power Supply Cord-Prepare hole, Drill hole

2 Power Supply Cord–Prepare hole

3 Direct Wire–Route cable

Wood	Metal
cabinet	cabinet

Wood cabinet: Sand the hole until smooth.

Metal cabinet: Cover hole with grommet included with power supply cord kit.

Option B, Direct Wire:

Helpful Tip: Wiring the dishwasher will be easier if you route the cable into the cabinet opening from the right-hand side.

1 Direct Wire — Drill hole

Optional location

PreferrePr e dlocationlocation

(1.9 cm)

Drill a ³⁄₄" (1.9 cm) hole in right-hand cabinet side or rear. See product and cabinet opening dimensions.

2 Direct Wire–Prepare hole

Wood	Metal
cabinet	cabinet

Wood cabinet: Sand the hole until smooth.

Metal cabinet: Cover hole with grommet (Part Number 302797 - not provided).

8

(15	.	6
		”
	2	cm)

Route cable from power supply through cabinet hole (cable must extend to the right front side of cabinet opening). Tape cable to the floor in area shown. This will prohibit cable from moving when dishwasher is moved into cabinet opening.

Prepare and Route Water Line

Helpful Tip: Routing the water line through the left side of cabinet opening will make water connection easier.

1 Drill hole

PreferredPr ferredloloccations

OptionalOptionallocationslocations

¹⁄₂"

(1.3 cm)

Drill a ¹⁄₂" (1.3 cm) hole in the cabinet side or rear.

2 Measure water supply line

Hot water line

Measure overall length of copper tubing or flexible braided water supply line. Attach to the hot water line using a connection configuration that is in compliance with local codes and ordinances. The water line to the dishwasher should have a manual shutoff valve.