KitchenAid KUDS50FVPA Install Moisture Barrier under a wood countertop, Prepare Dishwasher

Models: KUDS40FVPA KUDS50FVPA KUDE70FVPA KUDC03IV KUDS30IV KUDE60FVPA

1 56
Download 56 pages 6.48 Kb
Page 11
Image 11
Option C, Waste disposer – with air gap

Option C, Waste disposer – with air gap

Waste disposer – with air gap

Screw-type clamps

 

Air gap

 

Large silver drain

 

Disposer inlet

hose clampl

(provided)

Waste disposer – with air gapInstall Moisture Barrier (under a wood countertop) Rubber hose Install moisture barrier (under a wood countertop) connector

Prepare DishwasherOption D, No waste disposer – with air gap Drain hose

Drain trap

Install Moisture Barrier (under a wood countertop)

Install moisture barrier (under a wood countertop)

Moisture barrier

1No waste disposer – with air gap

2Doing so can result in serious injury or cuts.

3Black end

4

5 Use two or more people to move and install dishwasher.

1.Using a hammer and screwdriver, knock plug into disposer.

2.Use needle-nose pliers to remove plug.

3.Connect black end of drain hose to air gap and cut if needed. (Do not cut ribbed section.)

4.Attach drain hose to air gap with large silver drain hose clamp (provided). Use pliers to squeeze clamp open and move into position. If the drain hose was cut, use a 1¹⁄₂" to 2" (3.8 to

5 cm) screw-type clamp (not provided).

5.Use a rubber hose (not provided) with screw-type clamps (not provided) to connect from air gap to disposer inlet.

1.Make sure the area under the cabinet is clean and dry for installation of the moisture barrier.

2.Remove the backing of the moisture barrier and apply to underside of the countertop along the front edge of the counter.

Prepare Dishwasher

Tip Over Hazard

Option D, No waste disposer – with air gap

No waste disposer – with air gap

Screw-type clamps

 

Air gap

 

Large silver drain

 

 

 

 

 

 

 

 

 

hose clamp

 

 

 

 

 

 

 

 

 

 

(provided)

Waste tee

 

 

 

 

 

 

Rubber hose

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

connector

 

 

 

 

 

 

 

 

 

 

Drain hose

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drain

 

trap

 

 

 

 

 

 

 

 

 

 

1 Black end

1. Connect black end of drain hose to air

gap and cut if needed. (Do not cut

 

 

 

ribbed section.)

 

 

 

 

 

 

2. Attach drain hose to air gap with large

 

 

 

2

 

 

silver drain hose clamp (provided).

 

 

Use pliers to squeeze clamp open and

 

 

 

move into position. If the drain hose

 

 

 

was cut, use a 1¹⁄₂" to 2" (3.8 to 5 cm)

 

 

 

screw-type clamp (not provided).

3

 

 

3. Use a rubber hose (not provided) with

 

 

 

screw-type clamps (not provided) to

 

 

 

connect from waste tee to air gap.

Do not use dishwasher until completely installed. Do not push down on open door.

Doing so can result in serious injury or cuts.

Excessive Weight Hazard

Use two or more people to move and install dishwasher.
Failure to do so can result in back or other injury.

1 Put dishwasher on its back

11

Page 11
Image 11
KitchenAid KUDS50FVPA Install Moisture Barrier under a wood countertop, Prepare Dishwasher, Waste disposer - with air gap