5.Reinstall electric box cover with all wires contained inside the terminal box.
Connect Water Supply Line and Drain Hoses
1.Connect water supply line to the water valve under the sink.
A
5.Connect the drain hose using one of the following options:
Option 1: Waste disposer no drain air gap
AC
B
A. For new construction, remove disposer plug.
B. Connect drain connector to waste disposer.
C. Tighten clamp.
Option 2: No waste disposer and drain air gap
A 
B 
C
A. Hot water supply
2.Slide clamps onto drain hoses (Figure A). Do not cut drain hoses.
3.Push hose into drain connector until fully seated (Figure B). Several “clicks” will be heard.
4.Slide clamp into position (figures C and D).
A | B |
C | D |
A. Drain hose connector
B. Drain air gap
C. Waste
Option 3: Waste disposer and drain air gap
A 
B 
C
A. Drain hose connector
B. Drain air gap
C. Waste
11
