Complete Installation
1.Pull out drawer rails.
2.Set drawer onto rails.
4.Recheck left to right level by placing the level on the top of the drawer.
5.Slide the dishwasher into position in the cabinet opening. Check to ensure that the drain hose and electrical wiring are not kinked.
6.In the cabinet under the sink, coil excess drain hose and wrap with a zip tie. Plug in dishwasher or reconnect the power.
FF | ON |
O |
|
3.Pull rails forward until they snap into position.
7.Select the Rinse Only cycle and press START/RESUME. Allow the dishwasher to fill, rinse and drain. Check for leaks. If leaks are found, secure the connection and repeat this step.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the User Instructions or contact the dealer from whom you purchased your dishwasher.
14
