HEAVY DUTY DISPOSERS
MODELS KWE-200, KWI-200,
INSTALLATIONINSTRUCTIONS
INSTALLER: FINAL CHECK LIST
GENERAL
0 1. Remove unit from carton and check for shipping damage.
0 2. Sink flange assembled in center of drain opening and flange seals in place to assure a water tight seal.
0 3. Disposer level - not installed at an angle.
PLUMBING
01. If installed in old house, existing drain line from sink to sewer cleaned.
02. Long, horizontal drain lines eliminated.
03. Drum traps and grease traps should not be used.
04. Seal at drain spout properly positioned.
05. Center line height of drain line must not exceed center line height of disposer discharge opening.
06. Mounting screws and spout screws properly tightened to prevent leaks.
07. Compliance with all aspects of local plumbing code.
ELECTRICAL CONNECTION
0 1. Properly fused, 115 volt, 60 hertz branch circuit of 15 ampere capacity. 0 2. Disposer properly grounded before operating.
0 3. All connections must comply with the National Electrical Code and/or local electrical code.
OPERATIONAL
0 1. Before operating, check to assure grind chamber is free of any foreign objects.
0 2. Activate disposer
THANK YOU INSTALLER:
1. Complete Installation Check List.
2.Leave all literature (including Check List) for customer.
3.Notify dealer that electrical work and plumbing are completed,