Electrical connection

WARNING

Electrical Shock Hazard

Disconnect power before making electrical connections.

Connect ground wire to green ground screw in terminal box.

Failure to do so can result in death or electrical shock.

20. Pull power supply cable through the wiring box strain relief. Use caulking to seal openings. Attach wiring box to wall and securely tighten screws.

21. Make electrical connection:

23. Connect the vent system and seal all the connections with duct tape.

Go to Step 25.

24. For non-vented (recirculating) installations:

Insert the charcoal filter into the opening behind the center grease filter and lock into place.

Go to Step 25.

mounting

screws

25. Install the upper chimney cover. Slightly spread the sides of the cover apart and hook them behind the chimney mounting brackets. Attach

27. Reinstall the filters.

Note: Use two hands to install filter, one to pull and turn the knob, the other to hold the filter in place so that it doesn’t fall.

Grasp one of the filters so that the knob faces down and toward the back of the hood.

Insert the filter end without the knob into the retaining channel in the front of the hood.

Pull knob forward, toward the front of hood, while turning knob to the left (counterclockwise) so that the locking lever does not protrude from the filter.

Insert the knob end of the filter into the retaining channel in the back of the hood.

Turn the knob to the right (clockwise) to lock the filter in place.

Repeat for remaining filters.

Check operation

Turn power on.

blower indicator

power supply cable

black wires

green ground screw

the cover to the brackets with 4 mounting screws. Tighten screws securely.

light 1

2

3 L

twist-on connectors

white wires

hood wiring

Connect the white wire of the power supply cable with the white lead in the hood using a twist-on connector; connect the black wire of the power supply cable with the black lead in the hood using a twist-on connector.

Connect the power supply green ground wire under the unused green, ground screw.

Tighten strain relief screws.

Replace the terminal box cover.

Do not turn power on until installation is completed.

Install chimney sections

For vented installations:

22. Install the damper on top of the exhaust opening. Make sure

8the damper opens freely.

mounting

screws

26. Install the lower chimney cover. Slightly spread the sides of the cover apart and hook them behind the upper chimney cover and the wall. Attach the cover to the hood with 2 mounting screws. Tighten screws securely.

For non-vented (recirculating) installations: Insert the two vent grates into the openings on each side of the lower chimney and fit them into the diverter outlets.

Make sure directional

 

 

symbols point toward

 

 

top and front of hood

vent

front of

as shown.

hood

grate

 

 

The hood control panel is located on the right-hand front surface of the hood.

To check the operation of the hood:

Push the right-hand button “L” in to turn the lights ON, push in again to turn lights OFF.

Push the left-hand button “1” in to turn the blower ON. Note: This button must be pushed in for the blower to operate at any speed. The blower indicator light will light up to indicate blower is ON and the blower will operate at LOW speed.

Push button “2” to operate the blower at MEDIUM speed.

Push button “3” to operate blower at HIGH speed.

Push button “1” to turn blower OFF.

Page 8
Image 8
KitchenAid Pro Line Series installation instructions Check operation, As shown, Blower indicator, Light

Pro Line Series specifications

The KitchenAid Pro Line Series stands as a hallmark of culinary excellence, combining professional-grade performance with a sleek design that suits both aspiring home cooks and seasoned chefs. Known for their robust construction and powerful capabilities, these appliances are engineered to elevate the cooking experience.

One of the key features distinguishing the Pro Line Series is its powerful motor. With heavy-duty options capable of delivering high torque, these kitchen appliances adeptly handle a variety of tasks, from kneading dense bread dough to whipping cream into soft peaks. The Pro Line Series includes both stand mixers and blenders, each equipped with motors specifically designed to sustain heavy use without compromising on performance.

The stand mixers in this series come with a variety of bowl sizes, including the 7-quart capacity, allowing for large batches of ingredients. This feature is particularly beneficial for anyone preparing meals for gatherings or experimenting with complex recipes. Additionally, they offer multiple attachments ranging from dough hooks to food processors, making them versatile tools in any kitchen.

Furthermore, the KitchenAid Pro Line Series incorporates advanced mixing technologies such as the planetary mixing action, which ensures thorough mixing by rotating the beater while also spinning around the bowl’s interior. This efficient design minimizes the need for manual scraping and maximizes ingredient integration.

For the blenders in the Pro Line Series, they feature stainless steel blades and a unique design that fosters optimal blending efficiency. With multiple speed settings and a powerful motor, these blenders can handle everything from smoothies to soups. Some models even come equipped with pre-programmed settings that tailor the blending process to specific recipes, ensuring consistency every time.

Durability is another hallmark of the Pro Line Series. Crafted with high-quality materials, these appliances not only provide aesthetic appeal but are also built to withstand the rigors of daily use. A heavy-duty die-cast metal construction provides stability during mixing or blending, reducing vibrations and enhancing safety.

In conclusion, the KitchenAid Pro Line Series is a testament to exceptional design and engineering. With its powerful performance, advanced technology, and durable construction, it offers a professional-quality solution for home cooks keen on pushing culinary boundaries. Whether tackling simple recipes or intricate dishes, the Pro Line is a trusted partner in the kitchen, empowering users to create confidently and efficiently.