Style 2 - Connecting to a Water Line

Additional Parts Needed: Coupling, ferrule and nut.

Slide the purchased nut then the purchased ferrule onto the tubing. Push the tubing into the purchased coupling as far as it will go. Slide the nut and ferrule forward. Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

LowerLevelingLegs

NOTE: All 4 leveling legs must contact the floor to support and stabilize the full weight of refrigerator. Rollers are for moving refrigerator and not for permanent support.

Use socket wrench to turn leg levelers on both sides of refrigerator to the right (clockwise) until refrigerator weight is supported by leveling legs. The rollers should be off the floor. To avoid cabinet damage, do not apply more than 50 inch - pounds (58 cm - kg) of torque to the leveling legs.

A

B

C

D

E F

A. Line to refrigerator

D. Coupling (purchased)

B. Nut (provided)

 

E. Ferrule (purchased)

C. Bulb

 

 

F. Nut (purchased)

5.Turn shutoff valve ON.

6.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Plug in Refrigerator

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Set control switch at top of cabinet to the OFF position.

8.Plug into grounded 3 prong outlet.

Move Refrigerator toFinal Position

IMPORTANT: To prevent floor damage, make sure levelers are raised (not touching floor) and refrigerator is on rollers before moving.

1.Place top of cardboard carton or plywood under refrigerator. Remove dolly.

2.Do not remove protective film or cardboard from door or grille.

3.Move the refrigerator straight back and evenly into the opening. Check to make sure that water tubing is not kinked and the power supply cord is on top of the refrigerator next to the cover.

A B

A. Rear leveling legs

B. Front leveling legs

Install ClassicSeries CustomPanels

IMPORTANT: KitchenAid is not responsible for the removal or addition of molding or decorative panels that would prevent the refrigerator from being serviced.

Door Panels

1.Remove all tape and door bracing from the refrigerator and freezer doors.

2.Remove the screws that attach the handles to the door frame.

3.Slide the decorative door panels into the door frames.

4.If needed, route the door panels or install a filler panel between the doors and the decorative panels. See the “Classic Series Custom Panels” section.

AA

A. Panels

20

Page 20
Image 20
KitchenAid manual LowerLevelingLegs, Plug in Refrigerator, Move Refrigerator toFinal Position, Door Panels

Refrigerator specifications

The KitchenAid 338 Refrigerator, model 4KSRF42D, is an exemplary appliance that combines functionality with a sleek design, making it a prime choice for modern kitchens. This refrigerator offers an impressive blend of features, technologies, and characteristics that elevate food storage and preservation.

One of the standout features of the 4KSRF42D is its spacious interior. With a total capacity that accommodates a significant amount of groceries, this refrigerator ensures that there is ample room for all your food items and beverages. Configured with adjustable shelves and spacious bins, organization and access to your favorite foods are simple and efficient.

The refrigerator incorporates the innovative Preserva Food Care System. This advanced technology utilizes dual cooling systems that maintain optimal humidity levels and temperature, helping to keep fruits and vegetables fresher for longer periods. The system cleverly prevents the transfer of odors between the refrigerator and freezer, ensuring that your food maintains its intended flavor.

Another notable characteristic of the KitchenAid 338 is its sleek stainless-steel exterior, which not only looks modern but is also easy to clean. The fingerprint-resistant finish helps keep the appliance looking immaculate, even in bustling kitchen environments. Additionally, the countertop depth design means it seamlessly integrates into kitchen cabinetry for a built-in look.

Energy efficiency is a key consideration for modern consumers, and the 4KSRF42D excels in this regard as it meets Energy Star certification standards. This ensures minimal energy consumption without compromising on performance, ultimately reducing your utility bills while being environmentally friendly.

The refrigerator is equipped with a sophisticated ice maker located in the freezer compartment. This feature means you always have a reliable supply of ice at hand for those hot summer days or entertaining guests. The easy-to-access water dispenser on the exterior front allows for instant hydration with filtered water.

In terms of digital technology, the KitchenAid 338 comes with an intuitive LCD display that allows users to easily monitor and adjust temperature settings in both compartments. Smart functionality ensures that users can even receive alerts to changes in temperature through mobile notifications, offering added convenience.

Overall, the KitchenAid 338 Refrigerator, model 4KSRF42D, is a culmination of advanced features and elegant design. Its emphasis on preserving food quality, energy efficiency, and user-friendly technology makes it an excellent addition to any contemporary kitchen. Whether you are an avid home chef or simply looking to upgrade your kitchen appliances, this refrigerator constitutes a worthy investment that promises reliability and aesthetic appeal.