KitchenAid W10136912C Installation Instructions, Unpack the Ice Maker, Location Requirements

Models: W10136912C

1 32
Download 32 pages 29.22 Kb
Page 3
Image 3

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic

precautions:

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Disconnect power before cleaning.

Disconnect power before servicing.

Replace all parts and panels before operating.

Use two or more people to move and install ice maker.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Unpack the Ice Maker

WARNING

Excessive Weight Hazard

Use two or more people to move and install ice maker. Failure to do so can result in back or other injury.

Removing packaging materials

Before using, remove tape and glue from your ice maker. This includes the tape holding the door closed.

The ice maker is covered with a film. Completely remove the film before installing the ice maker.

Choose a well ventilated area with temperatures above 45°F (7°C) and below 100°F (38°C). Best results are obtained between 70°F (21°C) and 90°F (32°C). It is recommended that the ice maker be installed in an area sheltered from the elements, such as wind, rain, water spray, or drip.

When installing the ice maker under a counter, follow the recommended opening dimensions shown. Place electrical and plumbing fixtures in the recommended location as shown.

NOTES:

Be sure the power supply cord is not pinched between the ice maker and the cabinet.

Be sure the water supply line is not pinched between the ice maker and the cabinet.

Be sure the drain line (on some models) is not pinched between the ice maker and the cabinet.

To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water

and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. Do not use chlorine bleach on the stainless steel surfaces of the ice maker. These products can damage the surface of your ice maker.

Cleaning before use

34"

(86.4 cm)

Min.

34¹⁄₂"

(87.6 cm)

Max.

14¹⁄₂" (36.8 cm)

3¹⁄₂" 9"

(8.9 cm)(22.9 cm)

A

28¹⁄₂"

(72.4 cm)

After you remove all of the packaging materials, clean the inside of your ice maker before using it. See the cleaning instructions in the “Ice Maker Care” section.

Location Requirements

To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The ice maker may be closed-in on the top and three sides, but the installation should allow the ice maker to be pulled forward for servicing if necessary.

Installation of the ice maker requires a cold water supply inlet of ¹⁄₄" (6.35 mm) OD soft copper tubing with a shutoff valve and either a gravity-drain system or condensate pump to carry the water to an existing drain.

B

24"

(60.1 cm)

18"

(45.7 cm)

A. Recommended location for electrical and plumbing fixtures. B. Floor level

You should choose a location where the floor is even. It is important for the ice maker to be level in order to work properly. If needed, you can adjust the height of the ice maker by changing the height of the front and rear leveling legs. See “Leveling.”

For better performance and higher energy efficiency, do not operate in direct sunlight.

3

Page 3
Image 3
KitchenAid W10136912C Installation Instructions, Unpack the Ice Maker, Location Requirements, Removing packaging materials

W10136912C specifications

The KitchenAid W10136912C is a high-performance kitchen appliance designed to enhance food preparation and cooking efficiency. This versatile product stands out with its combination of innovative technologies and user-friendly features, making it an essential tool for both home cooks and culinary enthusiasts.

One of the main features of the W10136912C is its powerful motor, which ensures consistent performance during various tasks, from mixing to whipping and kneading. The appliance is equipped with multiple speed settings, allowing users to tailor the mixing speed to their specific needs. This versatility is particularly beneficial for recipes that require precise mixing, whether it's a delicate cake batter or a thick dough.

The design of the KitchenAid W10136912C is both functional and stylish. The robust construction guarantees durability, while the sleek finish adds a modern touch to any kitchen decor. The appliance also features a large capacity bowl, accommodating batches of dough or mixtures up to several quarts. This generous size is ideal for those who frequently entertain guests or prepare large meals.

In terms of technology, the W10136912C incorporates a planetary mixing action, which ensures that all ingredients are thoroughly mixed. This feature allows the beater to reach every corner of the bowl, resulting in a uniform mixture without the need for manual scraping. Additionally, the inclusion of various attachments – such as a dough hook, flat beater, and wire whip – provides users with the flexibility to tackle a wide range of recipes.

The ease of cleaning is another significant aspect of the KitchenAid W10136912C. Most attachments are dishwasher-safe, making post-cooking cleanup a breeze. The smooth surfaces of the appliance also allow for quick wipe-downs, ensuring that maintenance is minimal.

Safety features are also integrated into the design, including a locking mechanism that secures the mixing bowl in place during operation. This ensures that users can mix with confidence without worrying about spills or accidents.

Overall, the KitchenAid W10136912C is a multifunctional appliance that brings convenience and efficiency to the kitchen. Its combination of powerful performance, thoughtful design, and innovative technology makes it a reliable choice for anyone looking to elevate their cooking experience. Whether you are whipping up a simple recipe or tackling an elaborate culinary project, this appliance is engineered to meet the demands of modern cooking.