Drain Connection, Gravity Drain System

REAR VIEW

A. Water supply tube clamp

B. Vent hose (drain pump models only)

C. Inlet water tube clamp and supply line connector

D. Drain hose (drain pump models only)

6.Remove and discard the short, black plastic tube from the end of the water line inlet.

7.Thread the nut onto the end of the tubing. Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

NOTE: To avoid rattling, be sure the copper tubing does not touch the cabinet’s side wall or other parts inside the cabinet.

Drain Connection

Gravity Drain System

Connect the ice maker drain to your drain in accordance with all state and local codes and ordinances. If the ice maker is provided with a gravity drain system, follow these guidelines when installing drain lines. This will help keep water from flowing back into the ice maker storage bin and potentially flowing onto the floor causing water damage.

■Drain lines must have a minimum of ⁵⁄₈" (15.88 mm) inside diameter.

■Drain lines must have a 1" drop per 48" (2.54 cm drop per 122 cm) of run or ¹⁄₄" drop per 12" (6.35 mm per 30.48 cm) of run and must not have low points where water can settle.

■The floor drains must be large enough to accommodate drainage from all drains.

■The ideal installation has a standpipe with a 1¹⁄₂" (3.81 cm) to 2" (5.08 cm) PVC drain reducer installed directly below the outlet of the drain tube as shown. You must maintain a

1" (2.54 cm) air gap between the drain hose and the standpipe.

■It may be desirable to insulate the drain line thoroughly up to the drain inlet.

SIDE VIEW

A	B	C	D
A. Line to ice maker			C. Ferrule (purchased)
B. Nut (purchased)			D. Supplied line from ice maker

8.Install the water supply tube clamp around the water supply line to reduce strain on the coupling.

9.Turn shutoff valve ON.

10.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

		A
	1⁷⁄₈"	B
	1⁷⁄₈"
	(1.9 cm)
		1" (2.5 cm)
	20" (50.80 cm)	C
	20" (50.80 cm)	2" - 1¹⁄₂"
		2" - 1¹⁄₂"
		(5 cm - 3.8 cm)

A. Drain hose

B. 1" (2.54 cm) air gap C. PVC drain reducer

D. Center of drain should be 20" (50.80 cm) from front of door, with or without the ³⁄₄" (1.91 cm) panel on the door. The drain should also be centered from left to right (8¹³⁄₁₆" from either side of the ice maker).

Drain Pump System (on some models)

Connect the ice maker drain to your drain in accordance with the International Plumbing Code and any local codes and ordinances.

NOTE: If the drain hose becomes twisted and water cannot drain, your ice maker will not work.

W10136912C specifications

The KitchenAid W10136912C is a high-performance kitchen appliance designed to enhance food preparation and cooking efficiency. This versatile product stands out with its combination of innovative technologies and user-friendly features, making it an essential tool for both home cooks and culinary enthusiasts.

One of the main features of the W10136912C is its powerful motor, which ensures consistent performance during various tasks, from mixing to whipping and kneading. The appliance is equipped with multiple speed settings, allowing users to tailor the mixing speed to their specific needs. This versatility is particularly beneficial for recipes that require precise mixing, whether it's a delicate cake batter or a thick dough.

The design of the KitchenAid W10136912C is both functional and stylish. The robust construction guarantees durability, while the sleek finish adds a modern touch to any kitchen decor. The appliance also features a large capacity bowl, accommodating batches of dough or mixtures up to several quarts. This generous size is ideal for those who frequently entertain guests or prepare large meals.

In terms of technology, the W10136912C incorporates a planetary mixing action, which ensures that all ingredients are thoroughly mixed. This feature allows the beater to reach every corner of the bowl, resulting in a uniform mixture without the need for manual scraping. Additionally, the inclusion of various attachments – such as a dough hook, flat beater, and wire whip – provides users with the flexibility to tackle a wide range of recipes.

The ease of cleaning is another significant aspect of the KitchenAid W10136912C. Most attachments are dishwasher-safe, making post-cooking cleanup a breeze. The smooth surfaces of the appliance also allow for quick wipe-downs, ensuring that maintenance is minimal.

Safety features are also integrated into the design, including a locking mechanism that secures the mixing bowl in place during operation. This ensures that users can mix with confidence without worrying about spills or accidents.

Overall, the KitchenAid W10136912C is a multifunctional appliance that brings convenience and efficiency to the kitchen. Its combination of powerful performance, thoughtful design, and innovative technology makes it a reliable choice for anyone looking to elevate their cooking experience. Whether you are whipping up a simple recipe or tackling an elaborate culinary project, this appliance is engineered to meet the demands of modern cooking.

KitchenAid W10136912C Drain Connection, Gravity Drain System, Drain Pump System on some models

Models: W10136912C