
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect
Reconnect the
Failure to follow these instructions can result in death or serious burns to children and adults.
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
■ | Burner heads and caps |
■ | Grill grate (on grill models) |
Tools needed
■Tape measure
■#2 Phillips screwdriver
■¹⁄₈" x 4¼"
■Level
■Drill
■Wrench or pliers
■Pipe wrench
■Adjustable wrench or ⁵⁄₈" wrench
■³⁄₈" drive ratchet
■¹⁄₈" drill bit
■¹⁵⁄₁₆" combination wrench
■¹⁄₄", ³⁄₈", ⁵⁄₁₆" nut drivers
■³⁄₁₆" carbide tip masonry bit
■Marker or pencil
■
■Noncorrosive
■Tubing cutter
For LP/Natural Gas
Conversions
■T15 Torx®† screwdriver
■⁷⁄₈" socket
■Adjustable wrench
■½"
■7 mm nut driver
■Masking tape
■ Wave tray (on grill models) | |
■ Flame spreader (on grill models) | |
■ Burner assembly (on grill models) | |
■ Grease trays (2) (on grill models) | |
■ Griddle drip tray (on griddle models) | |
■ Grill drip tray (on grill models) | |
■ | Island trim |
■ LP orifice package (W10221288) | |
■ | Conversion label (W10221320) |
NOTE: The cooktop is manufactured for use with Natural gas. To convert to LP gas, see the “Gas Conversions” section.
Additional Parts Supplied on
■Model W10049700 water filter kit
■¼" to ¼" water supply union
Parts needed
■ Power supply cord kit: |
■ 30" (76.2 cm) and 36" (91.4 cm) models - A UL listed |
Parts supplied
Check that all parts are included.
■
A
B
A.
B.
NOTE:
■Gas pressure regulator
■Burner grates
†®TORX is a registered trademark of Acument Intellectual Properties, LLC.
40 amp power supply cord kit |
■ 48" (121.9 cm) models - A UL listed 50 amp power supply |
cord kit marked for use with nominal 1³⁄₈" (34.93 mm) |
diameter connection openings |
■ A UL listed strain relief |
■ UL listed wire connectors |
■ All models must be installed with a backguard if installing at |
zero clearance to a combustible backwall. See “Cabinet |
Dimensions” in the “Location Requirements” section for |
installation requirements. |
■ 30" (76.2 cm) Adjustable Backguard |
Order Part Number 8285148 |
■ 36" (91.4 cm) Adjustable Backguard |
Order Part Number 8284756 |
■ 48" (121.9 cm) Adjustable Backguard |
Order Part Number 8284755 |
■ 9" (22.9 cm) Backguard for 30" (76.2 cm) Ranges |
Order Part Number W10115773 |
■ 9" (22.9 cm) Backguard for 36" (91.4 cm) Ranges |
Order Part Number W10115776 |
■ 9" (22.9 cm) Backguard for 48" (121.9 cm) Ranges |
Order Part Number W10115777 |
4