KitchenAid W10520792B manual Custom Panel Dimensions

Custom Panel Dimensions

If you plan to install a custom overlay panel, you will need to make the panel yourself or consult a qualified cabinetmaker or carpenter.

IMPORTANT:

■The thickness of the overlay panel must be ³⁄₄" (1.91 cm).

■Overlay panel must not weigh more than 8 lbs (3.62 kg).

■Overlay panels weighing more than recommended may cause damage to your ice maker.

■Match wood grain direction with that of adjacent cabinets.

■Sand panel edges to provide a smooth finish.

■Use moisture sealer on both sides and all edges of the panel to avoid damage from moisture.

Option 1—Without Hinge-Side Spacer

To allow proper clearance for the door, prepare the custom overlay panel using the dimensions shown.

29¹⁄₂"

(74.9 cm)

14¹⁷⁄₃₂"

(36.9 cm)

		1¹⁄₄"				1¹⁄₄"
	(3.18 cm)				(3.18 cm)
			³⁄₄"	³⁄₄"
¹⁄₄"			(1.91 cm)	(1.91 cm)			¹⁄₄"
(6.35 mm)							(6.35 mm)

Option 2—With Hinge-Side Spacer

To achieve a flush installation with adjacent cabinets, prepare the custom overlay panel using the dimensions shown.

Front of Panel

³⁄₈"

(0.95 cm)

29¹⁄₂"

(74.9 cm)

³⁄₈"

(0.95 cm)

14⁵⁄₈" (37.1 cm)

Top of Panel

1¹⁄₄" (3.18 cm)

¹⁄₂"

(1.27 cm)

AB C

A. Front—visible surface when installed

B. Hinge side

C. Notch to a depth of ³⁄₈" (0.95 cm)

Bottom of Panel

AB C

¹⁄₂"

(1.27 cm)

1¹⁄₄" (3.18 cm)

A. Front—visible surface when installed

B. Hinge side

C. Notch to a depth of ³⁄₈" (0.95 cm)

4