KitchenAid W10520792B manual Drain Pump Mounting Tab Slot, Vent Tube

Models: W10520792B

1 72
Download 72 pages 44.73 Kb
Page 9
Image 9

Parts Locations

Drain Pump Installed

 

A

 

B

 

C

 

D

 

A

 

E

G

F

A. Vent tube

E. Ice maker unit power cord

B. ⁵⁄₈" hose clamp

F. #8-32 x ³⁄₈" pump mounting screws

C. Drain pump discharge tube

G. Drain pump power cord, clamp

D. Drain pump

and screw

6.Remove power cord clamp and ground screw attached to ice maker power cord, which is mounted to the unit base. See “Parts Locations” illustration.

NOTE: Clamp and screw will be reused.

7.Slide drain pump into the ice maker base on the right side. The pump mounting tab should slip into the rectangular slot in the ice maker base. It will be necessary to tip the pump slightly to slip into the slot. See “Drain Pump Mounting Tab Slot” illustration.

Drain Pump Mounting Tab Slot

A

A. Drain pump installed

8.Align the 2 screw holes at the rear of the pump. Use two #8-32 x ³⁄₈" screws, supplied. See “Parts Locations” illustration.

9.Connect drain tube to ice maker bin outlet (⁵⁄₈" ID), using ⁷⁄₈" adjustable clamp, supplied. See “Drain Tube” illustration.

10.Coil ice maker power cord into a 4" (10.2 cm) diameter coil. Wrap electrical tape around the power cord in several places to keep the cord in a coil. Locate coiled power cord between the drain pump and side of enclosure and plug into the receptacle of the drain pump. See “Parts Locations” illustration.

11.Attach the drain pump power cord to ice maker unit base with clamp and screw (removed in Step 6) that was used to attach ice maker power cord. See “Parts Locations” illustration.

12.Place new rear panel (small one for 15" ice makers, large one for 18") against the back of the ice maker. Route the vent tube and drain pump discharge tube through cutouts in the rear panel.

13.Secure rear panel with original screws. See “Rear Panel” illustration.

14.Secure vent tube to back of ice maker using 3 clamps and three #8-32 x ³⁄₈" screws, supplied. See “Vent Tube” illustration.

Vent Tube

NOTE: Do not pinch, kink or damage the vent tube. Check that it is not damaged, or pinched or kinked between the cabinet and the ice maker.

A

A. Mounting tab slot

B

A. Vent tube

B. Clamps and screws

9

Page 9
Image 9
KitchenAid W10520792B manual Drain Pump Mounting Tab Slot, Vent Tube

W10520792B specifications

The KitchenAid W10520792B is an innovative component designed to elevate your culinary experience. This replacement part is particularly known for its reliability and efficiency, ensuring that your KitchenAid appliances function optimally. One of the main features of the W10520792B is its compatibility with various KitchenAid models, which makes it a versatile choice for users seeking to maintain their kitchen equipment in peak condition.

One notable characteristic of the W10520792B is its durable construction. Made from high-quality materials, it is designed to withstand the rigors of daily cooking tasks, providing longevity and consistent performance. This durability means that home chefs can rely on this part to perform under pressure, whether mixing, kneading, or whipping.

The W10520792B showcases KitchenAid's commitment to innovative design. The part utilizes advanced manufacturing techniques to ensure precision, which contributes to the overall efficiency of KitchenAid appliances. This attention to detail not only enhances the functionality of the equipment but also allows users to enjoy a more seamless cooking experience.

Another essential technology found within the W10520792B is its user-friendly installation process. Designed with the homeowner in mind, this component can typically be replaced without the need for professional assistance, saving both time and money. Clear instructional guidelines usually accompany the part, enabling even less experienced users to successfully complete the replacement with ease.

Moreover, the W10520792B is part of KitchenAid's commitment to sustainability. The materials used are often environmentally friendly, ensuring that customers can maintain their appliances while being conscious of their ecological footprint. This quality appeals to consumers who value both performance and environmental responsibility in their kitchen tools.

In summary, the KitchenAid W10520792B is an essential component that embodies quality, durability, and innovation. Its compatibility with various models, user-friendly installation, and sustainable materials make it an excellent choice for maintaining the high performance of KitchenAid appliances. Home cooks can rely on this part to enhance their cooking experience, allowing them to create delicious meals with confidence. Whether you are an aspiring chef or a seasoned culinary expert, the W10520792B is sure to play a pivotal role in your kitchen adventures.