To Convert Oven Broil Burner
1.Use a ½" combination wrench to loosen the orifice hood away from the pin (about 2 to 2½ turns). The oven broil burner flame cannot be properly adjusted if this conversion is not made. See “Adjust Oven Broil Burner Flame” in the “Electronic Ignition System” section.
2.Reinstall the warming or storage drawer. See the “Replace Oven Racks and Warming or Storage Drawer” section for instructions.
3.Complete installation. See “Make Gas Connection” and “Electronic Ignition System” sections.
Checking for proper cooktop burner and oven bake burner flame is very important. Natural gas flames do not have yellow tips.
IMPORTANT: You may have to adjust “LO” setting for each cooktop burner.
A 
B
A. Locking screw
B. Orifice hood
22
