KLH KS-600 owner manual Setting the Clock, Using the Radio

SETTING THE CLOCK

Note: You must progress through the following process with less than 7 seconds between steps to avoid dropping out of time set mode.

1.If the KS-600 is playing, press the STANDBY/ON button (3) to enter standby mode.

2.Hold the MEMORY/TIME SET button (11) down for 3 seconds. The time display will begin flashing. Note: If this function is accidentally activated do nothing and normal operation will resume after 7 seconds.

3.Within 7 seconds, press either of the TUNING UP/DOWN/SKIP buttons (10 or 13) to select 12 or 24 hour mode.

4.Within 7 seconds, press the TUNING UP/DOWN/SKIP buttons (10 or 13) to set the hour. In the 12-hour mode, you must step through the AM hours to set PM hours. AM and PM icons are displayed in the main window (8).

5.Press MEMORY/TIME SET (11) to advance to minute setting. As before,

within 7 seconds, use the TUNING UP/DOWN/SKIP buttons (10 and 13) to set the minute.

6.Within 7 seconds, press the MEMORY/TIME SET (11) button one last time to finalize the setting. The seconds (not displayed) will start from 00 when you complete this step.

USING THE RADIO

1.Press the STANDBY/ON button (3) to turn the unit on. If the radio does not begin playing, press FUNCTION button (5) to select TUNER.

2.Use the FM/AM button (6) to select the FM or AM band.

3.Use the TUNING/SKIP UP/DOWN buttons (10 and 13) to tune the radio. There are two tuning modes. Briefly pressing either (10) or (13) changes the tuning frequency in 100 kHz steps on FM or 10 kHz on AM. Press and hold either SKIP button for 1 second then release and the radio will automatically tune to the next receivable station.

4.Radio reception is strongly influenced by antenna placement. Tune in your favorite AM or FM station and position the respective antenna for best reception.

10