KLH owner manual Antennas - Am And Fm, SELECT A LOCATION for your KS-600, Connect Power

ANTENNAS – AM AND FM

Unpack the AM antenna and snap it’s cylindrical end onto the base/mounting plate. Stretch out the twisted cord and Insert the small rectangular plug at the end into the socket (29) located on the side of the main unit. Note, this plug is keyed and only fits one way. Orient the AM antenna for best reception of your favorite AM station.

Locate the FM wire antenna and stretch it out. The plastic connector on the end of this wire should be pressed onto the center post of the FM antenna connector (28) on the right side of the KS-600. Some force may be necessary to accomplish this. Position this antenna for best reception of your favorite FM station.

SELECT A LOCATION for your KS-600

Because the KS-600 generates heat during operation it is necessary to provide open space around it for proper cooling. Failure to do so can significantly reduce the service life. Do not place the KS-600 near a heater or in direct sunlight. The KS-600 should not be placed atop electronic devices that generate heat.

In most situations the best radio reception will be had when the KS-600 and its antennas are near a window.

For proper remote control operation there must be an unobstructed path between the remote and the KS-600 face.

The KS-600 includes an aux input allowing external devices with a headphone output to be played through the KS-600. If this feature will be used, keep in mind the length of the interconnect cable needed when selecting the location.

CONNECT POWER

Plug the Power cord into an un-switched electrical outlet. Press the STANDBY/ON button to verify that the blue panel lights come on.

6