KLH owner manual PREPARING THE KS-600FOR USE

Thank you for purchasing the musicdock by KLH model KS-600 AM/FM executive shelf system with CD player, dock for iPod, and remote control. With proper care this system should provide many years of reliable operation.

UNPACK and verify that all accessories are present. Here is what is included:

1.The main unit

2.Two speakers

3.iPod dock w/ adjustable support

4.AM Loop antenna

5.Base for AM loop antenna

6.FM wire antenna

7.3.5 mm to 3.5 mm interconnect cable

8.Remote control

9.Battery for remote control (may be installed)

10.This instruction booklet

PREPARING THE KS-600 FOR USE

Unroll the wire from the right speaker. Grip the side of the wire that is marked with a dashed line. Depress the R+ (red) thumb tab and insert the bare wire end into the oval hole. Release the thumb tab to complete the connection. Connect the unmarked side of the R speaker wire to the black R terminal. Similarly, connect the left speaker to the left speaker terminals. The speaker terminals are identified as (30) on the control and feature identification drawing.

If you will be using the KS-600 with an iPod, insert the plug at the end of the dock cable into the socket (27) on the right side of the KC-600. DO NOT twist the plug to achieve alignment, as this WILL damage the plug. This dock only needs to be connected if you will be using an iPod with the KS-600.

Install the CR2032 “coin” cell BATTERY in the remote control. To do accomplish, press down and pull back to remove the battery compartment cover. Insert the battery with the large smooth surface marked with a + up as shown in the photo. Replace the cover.

Replace this battery when the remote’s operating range deteriorates.

5