Connecting the Subwoofer
Caution: Turn off your preamplifier/receiver and your subwoofer before making any connections!
Inputs and Outputs
Line In
Your Palladium Series powered sub- woofer is connected via line-level connections only. RCA-type and XLR inputs are provided and either may be used. Do not connect both at the same time. Use the “Subwoofer”, “LFE” or “Pre-amp” outputs of your system’s electronics to connect to the “LINE IN” input connections of your subwoofer. Use high-quality, shielded, line-level cables for these connections.
Line Out
This jack can be used as an alternate method of connecting a second subwoofer to your system. This second subwoofer can function as a “slave” to the primary subwoofer. (For more on this, see the “Back Pan- el Features” section of this manual.) RCA-type and XLR inputs are pro- vided and either may be used. Do not connect both at the same time. Use high-quality, shielded, line-level cables for these connections.