Klipsch ROOMGROOVE owner manual Thank You, Unpack the Box, Docking and Listening to an iPod

Thank You

Congratulations on your purchase of the Klipsch RoomGroove music center. The RoomGroove is a wireless transceiver utilizing Wireless KlipschCastTM Technology to transmit and receive CD-quality audio signals to and from other KlipschCast components. The RoomGroove features an iPod® dock and auxiliary input for connecting your favorite components and enjoying them locally or transmitting them throughout your home.

The RoomGroove is a true two-way, stereo sound system incorporating two long-throw woofers and two MicroTractrixTM Horn-loaded tweeters in a ported enclosure. This system provides the accuracy, detail and output that will bring your music to life as only Klipsch can.

Unpack the Box

Unpack the entire contents of the shipping box and make sure you have the following items.

0 0

RoomGroove
	Remote Control
0	0

Power Supply Universal Well Inserts

Place the RoomGroove on a sturdy surface. Plug the power cord into the rear of the RoomGroove and then into a standard wall outlet. The RoomGroove is now ready to listen to any source being transmitted with wireless KlipschCast Technology.

Docking and Listening to an iPod

The RoomGroove is intelligently designed to easily accommodate all iPods. Touching the Klipsch logo on the front of the RoomGroove will reveal the retractable iPod dock. The RoomGroove must be powered on for the drawer to open and close. When the dock is extended, touching the dock again will cause it to retract. The dock will not move when an iPod is docked. The dock will automatically retract when no iPod is present and the RoomGroove is in standby mode (the power LED will be red).

The RoomGroove is designed to work with Apple universal well inserts. Several inserts are supplied with your RoomGroove system. If your iPod came with an insert, it can also be used in the RoomGroove. To configure the RoomGroove for your specific iPod, select the appropriate well insert and place it in the universal well as shown in the diagram. Now you are ready to dock your iPod. While your iPod is docked, its battery is charging (until it is fully charged).

To listen to the docked iPod, press the “Listen” button on the RoomGroove or the remote until the “Listen” light becomes blue and you hear the iPod. The iPod can be directly accessed by pressing the “iPod” button on the RoomGroove’s remote control.

Connecting an Auxiliary Source

The RoomGroove offers a 3.5mm stereo auxiliary input on the rear of the device. To connect an auxiliary device, simply plug the audio output of the device into the “Aux Input” on the rear of the RoomGroove. You must use a 3.5mm stereo cable.

To listen to the auxiliary source, press the “Listen” button on the RoomGroove or the remote until the “Listen” light becomes blue and you hear the auxiliary device. This can also be done by pressing the “Aux” button on the RoomGroove’s remote control.

Note: The “Listen” light will be blue when listening to either a local iPod or a device connected to the local auxiliary input. If both inputs are in use, the “Listen” button will go from the Aux to the iPod in that order.

2